I have a sony bravia 32"V5500..it was working pretty well until my niece pressed something on the TV or the remote...now its showing display features vertically and horizontally like we can see in a TV showroom ...I m elaborating the problem...in the middle of the screen.."Demo Mode(Loop)..or sometimes "ON Braiva Engine Off"..and on the right side of the screen some features are showing vertically..."Bravia Full HD 1080,V,BE-3"...please tell me what should I do.

I have a Sony model KDL-32BXR6 that the TV Guide first showed no listings this past weekend. Last night when I entered the Guide the screen displaying the Setup/Display Setup Progress came up stating "In Progress". Same thing this morning. Something must have changes with the input signal if this occurred with two different sets.

The old standby for almost all Sony sets is with the set off:

(remote control-Sony)

Display, 5, Volume up, power

With set then on the display should show the tech menu

Press 8 and (set will display or should RESET in red, then press enter and it should (reset) turn green---this has been the standard reset on their set for several decades.

On the original SONY remote press display to remove that---if left on long enough it will actually burn that image into the screen--button on almost any Sony Tv remote will remove or clear it.

Hi,
Press Info/ Display button on tv remote once, on-screen display will disappear.
Only Sony tv remote will work for that, no other universal remote will close on-screen display.
Thanks.

Only Sony tv remote will work here to disappear onscreen display.
Have Sony tv remote and press INFO/ DISPLAY button once, on-screen display will disappear.
No other remote will work for that.
Thanks.

Try testing the remote by pointing it at a digital camera and press a button on the remote.If the remote works you will see the ir light on the display of the camera.If it does work you probably have a problem with the ir reciever on the tv

STEP 1: PRESS THE MODE BUTTON ON THE TOP OF THE REMOTE, THEN PRESS TV STEP 2: PRESS AND HOLD THE "SEL" BUTTON AND THESH "MUTE" BUTTON AT THE SAME TIME UNTIL THE BUTTONS ON THE TOP ARE LIGHTING UP IN SEQUENCE FROM RIGHT TO LEFT STEP 3: HOLD THE CHANNEL UP BUTTON UNTIL YOUR TV TURNS OFF. WHEN THE TV TURNS OFF HOLD THE CHANNEL DOWN BUTTON UNTIL YOUR TV IS BACK ON AND ALL LIGHTS ON TOP FLASH AT THE SAME TIME

It is On-Screen Display. Press Info " i " button on TV remote so on-screen display will disappear.
Thanks.

1. Press tv on your Sky remote control.

2. Press and hold down select and the red button together until the red light at the top of your Sky remote control flashes twice.

3. Press tv again

Then enter the remote control code using the number keypad. The red light will flash twice if a valid code has been entered.

Sony Code: 0000

4. Point your Sky remote control at your TV and press the Power button. If this turns the off as you'd expect, then the tv should be set, press Select and the remote should work

5. If the TV does not turn off press tv, then press the Power button again, repeat this process until the TV turns off, when the TV turns off press Select.

0000 worked for my XBR4 using the remote called: Comcast Custom DVR 3 Device found here:http://www.comcast.com/corporate/customers/customer_support/remotes.html