Logitech WebCam Pro 9000 freezes

Applications like Windows Live Messenger, or Yahoo messenger, and Skype have webcam applications. Also, some picture type programs allow webcam video capture...

Windows Media Encoder enables the ability for you to "LIVE" broadcast using your webcam utilising Windows Media Encoder 9 and your participant viewers watching you using Windows Media Player at the recieving end. So in other words, you are effectively setting up "your own" live streaming broadcasts either video, audio(such as internet radio) or both from your PC without using the likes of Skype, Yahoo, IM etc.
Check this link if you need any more help
http://forums.logitech.com/t5/Webcam-General-Discussion/Windows-Media-Encoder-9-amp-Your-Logitech-Webcam/m-p/132190

Sounds like a Camera Source problem with the software looking at a video card and not the webcam

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

Having proved your cam is working ,you can configure it to Yahoo Messenger 10.
COMPATIBILITY WITH YAHOO MESSENGER
Use Internet Explorer to visit this page to check compatibility and automatically download the latest webcam control

http://help.yahoo.com/l/us/yahoo/messenger/messenger10/webcam/mstacamtest.html

CONFIGURE SOFTWARE
Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the Yahoo software may have difficulty in locating it. Mine, I just unplug it from the USB and plug it back in, if yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.
Of all the chat programs, Yahoo is the most painful software to set up but if you follow these instructions you should be ok.

INTERNET CONNECTION
Webcam connected
Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

TESTING
> Messenger > My webcam - the warning panel will launch, click 'OK' and your webcam will start. You should be rewarded at this stage with your happy smiling face.

SET WEBCAM DEFAULT
With webcam still running > Messenger > Preferences > Webcam Broadcast > Camera Source - set your webcam as default using dropbox. > Camera Settings - adjust settings to suit. > Apply > OK
Take a note of any additional software, if you have multiple choice for Camera Source, you may wish to uninstall any redundant webcam software later to prevent conflicts

PERMISSION OPTIONS
> Messenger > Preferences > Webcam - make your default equipment selections and who you will allow to view you > Apply > OK

IN USE
When you are both on line and wish to show your webcam > Actions > 'Invite to view my webcam'.
Messenger 10:- > Actions > More Actions > invite to view my webcam. This will launch an invitation on your contacts screen when they 'Accept' your webcam broadcast will start- There can be considerable time lag ( +1 minute) before they see you, so don't be too impatient ( You can check the status on the bottom left of your webcam panel. You can 'drag and drop' the frame to a convenient location by grabbing the top border.

Your contacts may need to configure their connection the same as INTERNET CONNECTION above (Ignoring webcam connected) if they get a "webcam not connected" message

Sometimes you may have to broadcast the 'small image' option from the 'Webcam' menu on the top of your image frames. This happens when one of you is down on resources -its like sending a large photo by email - its quicker if you cut the size down
you can zoom up to 200% from the same menu when the webcam picture comes through

Use the 'Always on top' option from the 'webcam' menu - or your image will disappear under the message window when you type a message

logitech vid is a software just like yahoo messenger, its not actually the driver for your webcam, it also came together when you buy the logitech webcam, look for the other installer in the cd.

If the camera is working on other programs it should work on Yahoo Messenger.

The way to check is to ( in Messenger ) open "Messenger".
My Webcam.
You should see your picture on the camera there.
If you have the picture there then goto "Preferences" , "Webcam".

In there you will see 3 settings
"Always Ask my permission"
"Allow everyone to view my webcam"
"Always allow the following people to view my webcam"

Choose one of the settings, I use always allow the following people to view my webcam.

You can also tick the chatroom box.

There is option somewher in your messenger
that asks you to give the other person permission.
Could possibly be somewhere in the chat box when you open that.
I don't go on chat so I can't tell you exactly where but it is there.
Open your chat box and try in there first.Should say tools video or options.
Hope this helps.

try this link to download software

It does if you update your software

Try reinstalling the software and drivers.

yes you need to use yahoo or msn and then chat with that person and if you want to see them on cam you invite them to view webcam.