Question about One For All URC-4021 Remote Control
Where can i find a remote control for my tv is Emerson 19" TV/DVD/VCR Combo - EWC19T5 and also the company website.
I'm having the same problem with my emerson 27" tv/vcr/dvd - Finally found the website www.funai-corp.com
Just sent them email today so can't rate their service as of yet. Good luck to us all!
Posted on Oct 27, 2008
AT FUTURE SHOP OR BEST BUY THEY HAVE GOOD ONES!
Posted on Aug 11, 2008
Tips for a great answer:
0154, 0236, 0463, 0180, 0178,
The One For All 4 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable
box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
 Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
 Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
Sep 26, 2011 | One For All URC-3021 Remote Control
Dec 19, 2008 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo
Dec 18, 2008 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo
Dec 11, 2008 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo
Nov 19, 2007 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo
138 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: