Question about Watches
Posted by Anonymous on
I'm not familiar with the George watch but analog (non-digital) watches typically have a stem with which you set the time and the day. On most watches the stem has two clicks when you pull it out (gently). The first clich should set the day by rotating the stem counter-clockwise while the second click sets the time. On wind-up watches this stem also winds the watch when not pulled out.
Posted on May 01, 2011
Tips for a great answer:
Dec 01, 2012 | Watches
SETTING THE TIME AND DATE ON
AN OLD 4 BUTTON DIGITAL WATCH
SETTING THE TIME.
Press [L2] to move through
the modes. When the time display flashes, you are in the correct mode to set
the time. The hours first, then the
minutes and seconds.
Press [R1] to advance the
numbers, [R2] to go to the next.
Press [L2] to save your
settings. [L1] is not used; it's the light.
SETTING THE DATE AND DAY. After setting the time (seconds flashing) push [R2] to move though time, backwards, to date, [R1] to set day, [R2] to move to month [R1] to set the month. Push [R2] to get to the day of the week, then [R1] to change. [L2] to end.
Jul 26, 2010 | Fossil JR9455 Watch
Jun 28, 2010 | Watches
Mar 01, 2010 | Watches
Nov 21, 2009 | Watches
Dec 21, 2008 | Watches
Oct 16, 2008 | Freestyle Digital 79801 Watch
Apr 22, 2008 | Watches
407 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: