Printer nor Scanner work, jobs just back up into queque. Now I do have the original instaltn. CD, but it won't install. It seems in the Device Mgr. (3) necessary components are missing under the UnivSer'l.Bus Controllers: #1] USB Printing Support, #2] USB Mass Storage Device, #3] USB Comp. Device; and I was told that without them even the orig. CD could not be reinstalled. MEANWHILE I've already downloaded, (and I believe installed), Chipset Description Motherboard Drive Package; which I was told would solve the USB Driver problem, (so orig. CD could be reinstalled), but apparently it hasn't. Can you help??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Adjust you transmission speed to the lowest setting then try.
Keep boosting speed up until you can no longer connect then back down one speed.
This brand is known for communication problems with other brand of fax machines.This is the only workaround that has supplied results for me.
Go into the printer settings on the computer and change it from-send dirrectly to printer - to - Spooling. It will send a small portion of the print job at a time there for the printer mempry will not overload and report out of memory. Please rate this help if it works for you. Thanks!
Driver could be corrupt. Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came withthe printer. When the software program asks you to connect theprinter to the USB port, do so and it should again work properly. Hope this helps. Bud
You can cancel a fax job that is stored and waiting in the memory. 1 For MFC-210C, press Menu/Set, 2, 5. For MFC-420CN, press Menu/Set, 2, 6. Any jobs that are waiting will appear on the LCD. 2 If you have more than one job waiting, press ▲ or ▼ to select the job you want to cancel. Press Menu/Set. —OR— If you only have one job waiting, go to Step 3. 3 Press 1 to cancel. To cancel another job go to Step 2. —OR— Press 2 to exit without canceling. 4 Press Stop/Exit.
That should do it for clearing faxes you dont need you can also print off all the faxes in the memory and I believe that clears it. Enjoy, Lee
At the brother site. Click Product Support Then Your language, which for me was US English. Then click MFC then scroll down about 2/3rds the page you will find the MFC 420 CN Click that, than click downloads. The drivers , utilities and firmware for the MFC are all there.