- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I am just guessing but you may have an ant-copy signal embedded into program signal causing to when you are trying to look at a recording to another source. If that is the case then there is one way that would work. You need to connect inline with the video line out to the in of the other unit (yellow) and that would solve the problem. Go to xdimax.com and check out a dimax signal adaptor( can not recall what it goes by,description-wise) This is almost like trying to use a hdmi output and a audio/video connection at the same time.This also happened when doing the same with some video decks (vcr)
You can reset Thomson TG585 by pressing the reset button located at the back of the modem for few seconds while the modem is power on. The LEDs at the front would blink and the modem will restart with factory defaults setting.
Let me know if any further clarification/ assistance is required.
Good Luck! Appreciate generously, if the solution could have been of any help! CreativeTECH
visited his site and oficiel site thomson
your model and press dawlonde