Im trying to get a speechbubble to work - basically when u roll over an item it will appear in the speechubble - its like a shop - roll over the item and the item will appear - at the same time the cost will appear in an inventory box at the bottom.
please email me at [email protected]
PS - if you have email can I contact you?thanks!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I assume basic dust and dirt has been cleaned from the internal parts.
Usually printer holds these rubber rolls that are used for the paper intake. With time these rolls become hard and will stop working. Either changing these items (if possible) or carefully sanding these might help to solve your issue. However sanding will only be a temporary solution and in the long run changing those intake rolls will be the only option.
Inside your transmission is a Park Band. It works like a break to hold your vehical from rolling. Most of the time this will break if you park on alot of hill and when it rolls either forward or backwards. You will have to take it to the shop to be repaired or if you know how to replace it your self. The transmission will have to come out in order to replace the band.
Ur tv have a dead convergence fuse (FL231) must be replaced near FBT-(Flyback transformer) a big block of plastic with a wire to a HV deflection board the FBT must be also resolders too to restart FBT- HV.U have a solder iron,have a roll of solders,a roll desoldering wick or a desoldering pump.U can do basic soldering works?Yes.U can buy the RCA convergence fuse for the replacement at(FL231) at website like Ebay.com.Or the tvs shops will cost like $300 for parts and labors.Some of these screws are Alan Wrench design screws that hold the back cover RCA tv together.Must used Alan Wrench driver to open it if u plan to fixed it ur self.
Tv have a problems known as a convergence problems,it dead.The tv convergence board must be replacing parts to solved the tv picture convergence problems.U have all the tools like a soldering iron,desoldering pump or a roll desoldering braid and a roll of solders?Can u also do basic soldering works?Yes,to all these answers.Tries websites like Tvrepairworld.com,Tvrepairkits.com to buy a convergence kit to do the repair ur self.Or the shop,will cost u like $300-350 for parts and labors.
U have tools,like a soldering iron,a desoldering pump or a roll of desoldering braids,a roll of solders?U understand basic electronic also can do basic soldering work?This problems is the power supply board is the problems and the causes.That the board,where the power a/c cord plug into it.Take the tv aparts,searches the tv power supply board look for those parts call capacitors,These capacitors parts are dying,it alway bulges or puffing up on it tops.Replaced all these dying capacitors,ur tv now will be stableling the power supply board voltages to the tv again,tv it will power on wright away now,will not taking long times again like 2 or 3 mins.. so on.Or Tries websites like Shopjimmy.com,Ebay.com to buy a whole power supply board for the replacement.