My Panasonic 8045 machine is showing an error code E03-25. Please give me a solution.

For most of the Panasonic DP-8000 series multi-function printers, a J42 error indicates a paper jam in the paper exit/fuser area. The pictures here, https://www.manualslib.com/manual/117056/Panasonic-Workio-Dp-8060.html?page=45#manual , for the DP-8060 may help you find the jam. This manual does apply to the DP-8045, https://www.manualslib.com/manual/117056/Panasonic-Workio-Dp-8060.html#manual .

I hope this helps. If the error persists, there may be a damaged sensor inside the printer. That is not something I can't help you solve.

Cindy Wells

Check the big white gear behind the flywheel to see if is broken where the gear mates with the pin on the shaft.

reset code fuser error...press at the same time "original size" + 'function" + "3"
F9 mode, 06 (ram initialize) sub code 04 to reset fuser code

Drivers for that model of panasonic can be found on driverupdate us. Take a look. cheers

there is an error with the finisher/sorter

look to d LCD display lay out of machines shows and the location mo paper jammed, release all green lever ang slowly removed the jam paper.

ya ive had this loads of times ,ur using the wrong driver try it with the gdi driver not the pcl one cos it come stanard with gdi, if not ring me 0878118767 eire

used different panasonic model that support envelops.

it means that your finisher staple motor jammed. try to remove the staple cartridge and anything that might make the staple not to move.