When i press the skip song button to skip a song, 7 times out of 10 the player resets itself.

Make sure the unit is mounted level and not to secured that its pinching down on the unit

Instructions

1) Press and hold down the "Power" button on the Samsung BD- P1500 Blu-Ray player.

2) Verify that there are no discs inside the Blu-Ray player.

3) Press the "Search/Skip" button for 5-10 seconds until you see it restore itself to its default factory settings.

A menu should appear on the screen to confirm that you have reset the BD-P1500 Blu-Ray player.

Hope this solves your issue :-)

mode: for repeat
10+Album: to change song more than 10 like 11 19
Skip/Search: press one time will go to next song press and hold search the song
Play/Pause: start playing song or make it stop
Stop : stop the song you are playing
Eq/Prog : setting menu
Vol+- increase or decrease the sound

you have the play mode set to "intro",
how to solve this;
1) start playing a song.
2)Press the "Mode" button quickly, don't hold it down, just press it quick.
3)Select Play Mode by pressing the Mode button
4)Select "N" normal

all done.

The songs are in the wrong format - convert them to Mp3 and you will experience no more problems - read my "Tips & Tricks" under my profile for more detailed info

WAHA i've fixed it it was on repeat intro which means it plays the first quarter of he song so pretty much try to look at the repeat button and see if it is on that.....

Hmm well I don't know what to tell you about any of that since I am having problems myself with my own Sansa Mp3 player, but for the restarting song problem, did you check to make sure your mp3 player wasn't on repeat or hold? because if either of those operations were on then you would not be able to change the song with the skip button! Hope this helps!

Just find the songs details, and unclick skip when shuffle!! OR Windows media player 10 and 11, are almost the same, I use both, and I don't really know the difference. Go to start, click contrl panel, then change or remove programmes. Go to windows media player 11, and press delete! It won't delete it, it will change it back to windows media 10!!

hi your ipod will shut itself if no action is on you can determine the period of time that will happen good luck

Sorry, as far as i know you can't, you nead to reset: 1. Recharge the product by connecting to the pc (pc must be running). 2. Press the reset button using a sharp tool. Wait 10 minutes then connect the player and pc. (The reset button is between the FUNC and MODE buttons.) 3. Turn the player off and press the mode button while making the player and pc connection. 4. The message ¡°USB Connected¡± displays when turning the player on. 5. Disconnect the player and pc. 6. Connect the player and pc after turning off the player. The player is charged in about 2 hours if the player is off. 7. Upgrade to the latest firmware (Ver. 1.11 or higher).