Question about Samsung LN-T4671F 46 in. LCD Television

1 Answer

Samsung LN-T4671F Audio Problems


Thanks for the suggestion but there is a problem with that configuration. I have an HDMI cable connected to HDMI1 source from my PC video card and if I hook up the 1/8" mini-plug stereo cable to the PC IN AUDIO jack I will not be able to see the video if the source is switched to PC IN.

Posted by sef3rd on

  • sef3rd Aug 15, 2008


    There is no setting in the menus for this RCA audio port and HDMI cable. Had a tekky come out and replace the main board and still the RCA ports would not work. Samsung said my sound card maybe to old. I'm going to replace it and see if that takes care of the problem. Looks like that fixed the other RCA input jacks. Those were not working at all.

  • Anonymous May 11, 2010

    I think the whole idea from HDMI to PC is to use a surround system coming out from you pc audio card to external speakers.

    I had the same problem but eventually settled with the VGA input and mini stereo plug to get around the problem.

    Samsung TV's arent the best when trying to configure them on your PC.

    Hope this helps




1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 157 Answers

Hello sir

Posted on Aug 15, 2008

  • Anonymous Aug 15, 2008

    the HDMI cable is used for both audio and video

    You need to look in the program settings and tell the TV to use the HDMI cable for video only




Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My panasonic viera TC-55DX700C has 3 HDMI inputs. But, when I press the input button on my remote control, I can only select HDMI 1 or 2 or a component, not HDMI 3. Why?

Usually when you have more than one HDMI port you always should connect to the 1st and any other component extra to 2 then 3. In your set HDMI1 is best for viewing for 4K or default, HDMI2 is for a stereo that supports ARC and HDMI3 is for extra components. In most TV now the set will not let you connect to an input source unless you physically have a component with a cable in that source port first. I'm figuring that might be the case of your TV set.or else it wants you to use HDMI1 first If you do have a cable in HDMI3 with a component and it's not letting you connect to it, then the other thought could be that the plug has gone bad,

Apr 02, 2017 | Panasonic Televison & Video

1 Answer

I have 32" hand spree TV hooked up to satellite box with a cable connected to the hdmi 1 port. Problem locking to hmdi1 port

Check in the menu of the tv do there is any option to select the input source. If so the select there its to hdmi 1. after that turn off the tv and ON again and check do it go back to TV mode.
If you wish to get some details; check the site linked here. Pull up older posts.

Jun 24, 2016 | Hannspree XV32 32 in. LCD Television

1 Answer

What channel do I put my LG TV on to connect my Sony blueray player to watch netflix

channel is not the correct path
you need to be thinking What input source do I need on the tv
hdmi1 hdmi2 hdmi3 av1 av2 these are input sources
look on remote for input or source button .

Apr 18, 2016 | LG 42LC2D 42 in. LCD HDTV

1 Answer

I have a denon avr-1611 and can get sound playback through my connected speakers (not tv speakers) but no video output from hdmi. I have the receiver connected to a samsung tv. Is there any fix for th

You should check your Denon manual to be sure that the receiver has been set up correctly. My 1913 has many set up options including associating a particular HDMI out connection with a particular source like CBL/SAT or DVD. The fact that you hear sound indicates the HDMI cable connecting the cable box or DVD player to the receiver is working ( at least the sound portion of the HDMI in cable.)

Next, is the HDMI connection you are using to the TV the one selected in the source listing on the TV ? The sound and video circuitry on a receiver are separated and you can hear sound but see no video if the TV isn't selecting the correct source. For example if the TV is set to HDMI1 but you are plugged into HDMI 2. If this doesn't solve your problem try this:

At this point you don't know if the problem is the receiver HDMI connections or TV HDMI connections or a bad HDMI cable. The first thing to try is a new HDMI Cable. If that doesn't solve the problem then do the following.

If the TV has more than one HDMI connection try another HDMI port. Be sure to switch the source on the TV to the new HDMI port ie. HDMI1,HDMI2 or whatever.

If this fixes the problem you are done. If not then Try the same thing with the HDMI out ports on the receiver. Try each one not forgetting to set the receiver to use the HDMI port you are testing.
each time.

Since this can get confusing I would write down what you are testing each time so you don't get lost or confused.

If none of this works then you can try hooking up another TV to the HDMI cable, if you have one. If you do this and you still have a problem it points to the receiver as being the culprit.

The most likely problem is you have misconfigured the system so that is where I started. Each test is dependent on the fact that your system is correctly configured to begin with.

Sep 04, 2014 | Denon AVR-1611 A/V Receiver - 3D - 75 W...

1 Answer

Sony bravia 37ex524

check source setting via remote. If you have digital television then DTV most likely should be the source. If using HDMI on a Video player then HDMI1 check if video player cable is plugged into HDMI1 if you have one.

May 03, 2014 | Televison & Video

1 Answer

Switching HDMI inputs

Plug all cables in the ports in the back of your television, the use the remote of the television select Source scroll up or down for required hdmi channel select buy stopping it on the channel then press ok

Jan 08, 2014 | Televison & Video

1 Answer

RE: Denon AVR 3300 - I cannot get the system setup menu to display on Phillips P50PFP5332D tv screen? All connected components work and sound great, but I cannot see Denon's Setup menu on tv to a

I understand, it's something I've misunderstood on my denon avr-790 as well when connected to a samsung 8000 series led tv.
The answer isn't in the receiver's settings (you can be on whatever source you want on the receiver end when toggling the menu). You need to toggle through the tv's sources to find the menu (usually found on hdmi 1). I've spent towards an hour recently troubleshooting only to find that it was the tv's source that wasn't set properly and I was trying to change the receiver's settings instead of the tv's source.
Hope that helps!

Jan 16, 2012 | Denon AVR-485 Receiver

1 Answer

Put my ps3 on hdmi cable and now cant get it back to av . tryed holding the on/off button on for the first and second dong but still not back to av HELP


Welcome to Fixya. If you're using a HDMI cable to connect your Ps3 to your TV you need to set the input to HDMI. Use the remote of the TV look for Source or Input Button then change the Input to HDMI1 or HDMI2.

Thanks for using Fixya.

Feb 25, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

HDMI output from AVR-4806

You say your connected from the DVD to the Denon with an HDMI cord and the Denon to the TV with an HDMI cord and you get no DVD video? can you get the Denon setup menu? if so change the res. output on the DVD to 480p, 720p or 1080i but not 1080p

Feb 15, 2009 | Denon AVR-4806 Receiver

Not finding what you are looking for?
Samsung LN-T4671F 46 in. LCD Television Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76352 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides