An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
Uploaded 5 video answers.
Re: i neeed hellppp???!!!!!
There are two switches that move your lens ,i have found that inside
the tray right hand side in the front you will see a small opening that
is the reset switch **this sets on top of the on button ***((it will wear down or can become damegd after
prolonged use))),second is under the tray back left side **(TAN IN COLOR)**you cant see
it unless you have opend the case ,if there is no contact with one or
the other the lens will not slide to start the drive.Both have to be pressed to get the machine to start
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have the original PlayStation 2 console, there was a problem with it playing some of the newer games released for the ps2 after the slim was released. You can try using a laser lens cleaner to clean the laser, but the original ps2 just simply won't play some games.
It dont take much to misalign the laser drive. It will need to be looked at by someone who knows how to adjust or replace the laser. We do offer this service. Email us if your interested. [email protected]
Solved!!!at least in mine.. I found that the internal PS2 memeory card was corrupted..I deleted it and created a new one...problem solved!!! I lost all my saved games though..but still price worth paying to play my PS2 Games
If it will play DVD's this is a good sign. You will only need to clean the lens of the laser. Also clean the hub that the Disc rides on. I hope your in the right posting area, this is for the Phat PS2 consoles with the drawer that comes out to put the CD in. Procedure is different for Slim PS2.
Disconnect power and turn the case upside down.
Remove the screw covers to expose the case screws. These are little square pieces or square rubber pads. You can use a thin knife blade to pry the hard plastic squares up.
Remove all the screws.
REmove the Warranty sticker to the right edge of the power socket.
Turn the PS2 over to set it right side up.
lift the top cover from the back and pull it forward slightly to clear the CD tray. Be careful of a possibly Ribbon cable attached to the lid going to the REset/Eject buttons. Roll the cover over to the right leaving the ribbon intact.
Remove the Cd tray lid.
Polish the Laser lens, and remove any lint or hair from the Cd area. Use Alcohol and cotton swabs to clean the laser lens. By the way, Alcohol will damage a PS2 Slim lens. All lens are not created equally.
Hook up the power and A/v Cables.
REmove the little white disc from the Cd tray lid.
Place a Disc on the spindle, and cap the disc with the little white piece that you removed from the CD tray cover.
Boot up the PS2 and test it, Continue cleaning until you get it to work.
Put it back together, and your in business.
If you have trouble you can send your PS2 to the Playstation Clinic for Repair. Contact [email protected]