Key pad is not work - Sagem VS3 Cellular Phone

replace keypad if you can find it. the keys are mechanical and the pad is electric

re install driver for this key pad

possible need new key pad.first check no loose connection from key pad to the control board,if not replace key pad

My Dear Your Phone Key pad IC Fault So Please change Key pad IC
And Key pad Problem will Solved

First Try it:
Your Phone Key pad IC Fault So Please change Key pad IC
i hope Key pad Problem will Solved
IF Key pad Problem not Solved So
Secend Option:
Please New Software install in the Phone Problem will Solved

Hi,
Sorry to say this please replace keypad crstal IC,and jumper it will work 100% ....reheat the upper components and the the whole pcb,with care,the keypad ic is same as 6600, 6630, n70, 6680, 6280 LCD IC.



Please do rate the solution if the issue is resolved or post a comment for further assistance.


thank you for using fixya have a nice day:-)

check kep pad connector
or - chnga ic

Does the key pad on the door light up? Are there any tears in the key pad numbers? Does the key pad lock the doors?.
There are no fuses directly for the pad.. The key pad is linked directly to the RAP. module. If the locks work from the FOB the fuses for the Module are good. Chances are the pad is no good especially if it don't light up. The RAP module is above the driver side foot well, directly above the accelerator pedal . Hope this helps.

dust may be accumulated in key pad if u can try opening the panel and cleaning it or the connector of key pad would have failed try changing it

ur key pad domy is damaged so change it quickly