Question about Lenovo 3000 C200 Notebook

2 Answers

Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00H

I've been using the laptop without any problems untill i encountered the folowing ERROR: [email protected]#$

************************************************
Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00H
Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:02H / Port:00H

Press F1 For Setup, Press F12 For Boot Device Selection Menu
**********************************************

Well, F1 takes me into the Bios, all looks well. And F12 Does nothing. how ever i tried to boot from CD-drive but of no use, i tried to solve it million methods but invain i couldn't if any one has a solution for this please provide i'll be very thankfull

thanks in advance
srini

Posted by tosrisri on

  • 6 more comments 
  • Anonymous Aug 20, 2008

    i have same problem pl repl on my email add [email protected]

  • Anonymous Nov 10, 2008

    i have the same problem on toshiba satellite a100

    help me at [email protected]

  • aj_7poohlago Nov 12, 2008

    am having the same prob with compaq presario 5000! annoying..

  • luje89 Dec 29, 2008

    i have the same problem with toshiba(error 0701 )twice, please help me, i need to have my comp. allright, else i couldnt finish my programming work. can anyone help me? my mail is [email protected]

  • CHINNAPATRA Dec 30, 2008

    same pbm with lenovo 3000Y500 pc....same as srini...my mail id is [email protected]

  • naveengopal Feb 04, 2009

    Error

    0701: USB Over Current On HC/Port - Bus:00H Dev:1DH Fun:00H / Port:00H

    Will go only to BIOS Nothing sees to be wrong

  • Anonymous Feb 05, 2009

    I have same problem with my laptop acer aspire 5560. Could anybody help me to resolve this problem. Please email me at [email protected]
    Thanks you...


  • Anonymous Apr 10, 2009

    My notbook dosent start it shows
    USB over current on HC/Port;
    Plz some one solve it ?


×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Pls solve

Posted on Sep 19, 2008

Ad

moonbat

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer
Ad

1 Related Answer

TamirMeiri

Tamir Meiri

  • 94 Answers

SOURCE: hardware problem - not booting into windows

tosrisri hello,

If you have a VISTA DVD, please insert it, and use the BIOS to boot through your CD.
Then, when the VISTA installation comes up, press repair. Restart, and try again. Please report back.

Posted on Oct 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Usb over current


Fuse or supply chip has failed. A repair to the mother board is required.

Jul 24, 2013 | Toshiba SATELLITE A100-TA2 LAPTOP LCD...

1 Answer

Cannot connect with webex


"Over current" means you are drawing too much current from that port. If you have several USB devices attached at the same time it may be that you have too many and the system cannot supply the current needed. OR your machine isn't putting out enough current. Try unplugging everything but what you absolutely need.

Jun 23, 2013 | Microsoft Windows XP Home Edition

1 Answer

Error 0701: USB Over Current on HC/Port


Error 0701: USB Over Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00HCurrent On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00H

Sep 28, 2010 | Lenovo 3000 C200 Notebook

1 Answer

Error 0701 problem in lenovo laptop 3000 c series and N


Try turning on the computer in safe mode and turn on the computer by pressing f8 and see if that works. check in the bios if the cd drive is detected make sure that the disk you put in cd drive is a bootable disk

Jan 09, 2010 | Lenovo 3000 N100 Notebook PC

2 Answers

Rror 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H


youre probably turning it off wrong. you have to manually press shut down and wait for it to be fully shut.

Jun 29, 2009 | Lenovo 3000 C200 Notebook

2 Answers

No bootable device found.try reseating hard drive,error code 0141


Make sure you fixed the HDD properly..In some cases you need to push a little harder. See if any pins had been bent, if so straighten it, without breaking it.

Jun 07, 2009 | Dell Inspiron 1525 Notebook

2 Answers

0701 usb over current on hc/port error


I had the same problem on a toshiba satellite u400.
Usb over current on port ... blabla..
Please press F1 to resume or F12 to install.
F1 just ended up in a screen asking to press F2 or F12 which did nothing.
F12 did nothing.

Rebooting the pc ended in a black screen with a flickering HD symbol.

To be able to boot again on the BIOS I had to remove the battery and disconnect the plug.
Once It restarted booting on the error USB over current.

Si I took a USB mouse and tried to boot with the mouse plugged in on port , then another ... at the third port the PC booted normally with no error :)

Don't have any idea why it became faulty but it's now solved for me.

Mar 12, 2009 | Toshiba Satellite A135-S4527 Notebook

2 Answers

Error 0701: USB Over Current On HC/Port - Bus:00H...


Try connecting your USB peripherals through a mains powered hub.

Dec 02, 2008 | Lenovo 3000 C200 Notebook

1 Answer

Hardware problem - not booting into windows


One of your usb ports is either damaged or has an object stuck in it causing a short. Unplug all usb devices and look at each port. Note if one looks slightly different from the others. There is a plastic tab that fits into usb plugs. If this tab is bent and touches the side of the port, it can cause the short. If this is the case you may be able to either clean out or bend back the bent tab.

Sep 08, 2008 | Lenovo 3000 N100 0768 - Pentium Dual Core...

1 Answer

Hardware problem - not booting into windows


tosrisri hello,

If you have a VISTA DVD, please insert it, and use the BIOS to boot through your CD.
Then, when the VISTA installation comes up, press repair. Restart, and try again. Please report back.

Aug 09, 2008 | Lenovo 3000 C200 Notebook

Not finding what you are looking for?
Lenovo 3000 C200 Notebook Logo

12,498 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lenovo Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Lenovo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...