Question about Pioneer PureVision Pro-800HD 43 in. Plasma HDTV

2 Answers

Loud pop and tv went off...

Unplugged plasma and the green light came on briefly and I heard the tv turn off, red light started to flash. Can I replace the circuit board myself? What causes it? This is an expensive item to have this happen. We own 2 newer model elites too. I am worried!! Thanks for your help!!

Posted by dntraina on

  • 1 more comment 
  • Anonymous May 18, 2009

    will turn on for a second then turns off with a 5 blinking read light then pauses then continues red light flashing.



    rick

  • Anonymous May 19, 2009

    Wild- Rick, we had the exact same problem hit on our PRO 1000HD today May 18th, same day as you!... loud pop and black screen with flashing Red light.

    Looks like Pioneer will repair for no cost.

    Today is Mt. St. Helens erruption anniversary... maybe something to do with this. :)

    -Steve

  • Anonymous May 20, 2009

    My Plasma TV PRO1000HD died few weeks ago with the same problem. Pioneer is not honoring the free power supply replacement & service at this point. Did any one succeed in getting this repaired by Pioneer?



    Mohan

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Here is a solution from the Pioneer web site:

http://www.pioneerelectronics.com/PUSA/Support/Important%3A+Updated+Information+Regarding+Free+Power+Supply+Replacement+for+Certain+Pioneer+Plasmas
Important: Updated Information Regarding Free Power Supply Replacement for Certain Pioneer Plasmas Pioneer is continuing to offer a free, in-home/office power supply replacement for certain of its second and third generation plasma models listed below for customers who experience a problem with the original power supply. If a model is not listed below, no power supply replacement is needed and no further action needs to be taken.
If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded at your residence or office at no charge.
Plasma Models (15 listed):

  • PDP-505HD
  • PDP-503PU
  • PDP-5030HD
  • PDP-5031HD
  • PDP-433PU
  • PDP-4300
  • PDP-4310
  • PDP-4330HD
  • PRO-800HD
  • PRO-800HDI
  • PRO-1000HD
  • PRO-1000HDI
  • PDP-433CMX
  • PDP-502MX
  • PDP-503CMX
The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

Anyone with questions can call Pioneer's toll free hotline at 800-421-1404.
We apologize for any inconvenience.

Posted on Oct 30, 2008

Ad

dobegirl

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

All you get is a prompt

Posted on Apr 09, 2012

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I heard a loud pop then the tv turned off

First check the COF ic's on the buffer boards. Next check the main mosfets in the power supply.
1helpful
2answers

Plasma tv stopped working

hi i have a pioneer plasma tv pdpro4e all it doses is flash green red green red and on the mediar reciver as well tv dont come on help please
0helpful
1answer

Heard a loud pop and picture went out. Still have sound

Ur tv have burns capacitors,look for pop ups caps.
0helpful
1answer

Red blinking light

same problem, red blinking light in series of 5 flashes
1helpful
1answer

Vizio P50HDM No Picture/No Sound

this is most likely the sustainer board(s) problem. Replacing the sustainer boards should correct this problem for you. you can get the parts at vancebaldwin.com
1helpful
1answer

I heard a loud pop then tv screen went black, now

hi friend,,,,,,,
i think due to high voltage resistor in dma board has blasted,,,,,
did u see any burnt marks,,,,,,,,,reply me

thank u,,,,,,,,
3helpful
1answer

Vizio P50HDM No Picture/No Sound

replace the sustainer boards should correct this problem. New sustainer boards may cause red and green pixilation. If this happen, replace control board and TV is as good as new.
0helpful
1answer

Heard a pop and screen went blank - won't come back on.

Your Lcd Projector Lamp/DLP Television Lamp went out

its about $165-$200 to replace if not under warranty


0helpful
1answer

I heard a loud pop sound and my 48 zenith plasma tv picture went black. Even the words "video 1" don't show up when selected. It's getting power; The green/red light is on. I've checked all the...

Does anything come on the screen? Input display box? 
If no:
Sounds like it could be a blow capacitor. Cheap part, but need someone with a little electronic know how repair to fix it.
Not finding what you are looking for?
Pioneer PureVision Pro-800HD 43 in. Plasma HDTV Logo

2,346 views

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76620 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Raj Patel

Level 3 Expert

1042 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...