Question about Whirlpool Duet GHW9150P Front Load Washer
I am having an error code F11.The machine stops working at half cycle than it will blink the code and will no restart!I It was working properly till a few weeks ago!!! H E L P!!!!!!
The error code F-11 on your washing
Serial Communication Error
Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.
both this parts needs to be checked.
You will have to check the following to confirm where the fault exactly is:---
Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU).
Check the Drive system for any worn or failed components.
Check Wire Harness.
You can get required parts from www.repairclinic.com
Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.
Posted on Aug 12, 2010
Tips for a great answer:
Jan 30, 2016 | Dryers
Jun 27, 2011 | Whirlpool Duet Sport HT WFW8400TE Washer
Jun 22, 2010 | Whirlpool GHW9400 Front Load Washer
Jun 15, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Mar 28, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Jan 13, 2010 | Dryers
Jan 09, 2009 | Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft....
Dec 19, 2008 | Whirlpool Duet GHW9150P Front Load Washer
Dec 11, 2008 | Whirlpool Duet GHW9150P Front Load Washer
Aug 18, 2008 | Whirlpool Washing Machines
176 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: