Mouse pad problem, cursor is moving but click function is not working

Hi
It look like your mouse pad has malfunctioned, or the drivers have not been loaded during the boot process or the drivers are corrupted. To update the drivers go to device manager in control panel and right click on the mouse pad device, click properties at the bottom of the menu that comes up and click on update driver and this should then make the mouse pad work unless it has a fault.
Cheers

You might be able to disable the scroll function in the mouse settings. Open the control panel, then go to the Mouse icon. There might be a tab that says Device Settings. If so click that and look in Properties.

check the mouse settings in the control panel, these functions may be locked out or their may be a fault in the driver software.

Use a temporary external USB mouse, Click Start button from your laptop. Type "mouse" in Search Program & Files, click mouse under control panel. click Hardware tab,click properties, click change settings, click driver tab, check if the device is enable or click update diver or rollback driver if necessary.

Make sure the keypad is not locked on accident might be a function key and an Fkey. See if an external mouse works fine.

Make sure you have not pressed the little button right above the mouse pad that toggles between locking the mouse pad or freeing the mouse pad.

my laptop pad is not working the cursor is moving but not clicking on anything ......now wot can i do ???

Mouse pad gone bad. You need to repair it if you can, 
Best option is to take at nearest technician or Repair shop if it is under warranty still. 

To get enable or disable the Touch Pad you have to pulse the Fn + F9

You can also set this function as follow:

Start >> Control Panel >> Printers and other hardware

Click Mouse >> Touchpad (enable or disable)

Ok so here goes.... I had the same problem:

Go to the 'start' button and then hit the 'control panel' option, then click 'mouse' then go to 'Device Settings' and then to the 'settings'. When you get to this screen it shows a list on lthe left hand side choose the 'tapping' option and then ok.

Hope it works for you...it did for me.