- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try your local stores that sell vacuums 1st. Then try typing "on/off switch for an asda ud18005 vacuum cleaner" in your search engine on your computer. You will find a company/store that can sell it to you online, with a small shipping charge. If you can find a number of online stores that sell it, compare prices with a few. Charges can VARY a lot.
most likely the small belt that turns the brush roller came off or broke, thi item can be purchased where you bought your unit. also, after you replace the belt, clean out tangled hair or strings that may have caused the belt to go.
I just replaced the belt on my 4481. Very simple. Be sure unit is unplugged. Unlock handle and let it lay down. Remove two screws on plastic cover. I purchased my belt at target for 2.54. Part number anywhere is Eureka U. Remove the roller brush. Loop belt around drive motor first and then around roller brush inserting the roller back into place belt side first. Replace cover and your ready to go. 10 min fix.
You will need to get another belt, it's common that the people pulling the parts are so busy, that they sometimes mistakenly pull the wrong part, or the wrong part number was given, even a misprint in the manual. Needless to say, it seems that you don't have the correct belt. There is no adjustment for belt tension, so it has to be the wrong belt.
http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=542810 Generic problem for all Vacuums Hello I have a Hoover Posted by rrunner on Apr 24, 2008
Hello I have a Hoover vacuum cleaner, it's an older one model number 44535830.....I bought a new belt but have no idea how to put it on? Can you help me?
Hello, I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. I am not sure how old your Hoover is but the old style the belt would change from the bottom and you would have to remove the bottom plate, lift out the brushroll and slide the belt onto the center of the brushroll, then look for the belt guide stamped right on the bottom of the vacuum and it will show you how to twist the belt in order for the belt to work, if the belt is on right you will have suction, if the belt is on wrong it will be blowing instead of having suction. If it is newer – you will have to remove the bottom plate or the top cover depending on the age of the vacuum and the belt will be on one side and the procedure is still the same – lift out the brushroll, slide the belt onto the brush, re-insert the brushroll into it’s position, then take a screwdriver or what I call a belt puller and stretch the belt onto the belt pulley then track / roll the belt and it will run straight and true. So, if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions. http://www.hoover.comTelephone Contact our Customer Service Department at 1.330.499.9499 Monday through Friday 8 a.m. - 7 p.m. EST Thanks,Don – The Vac Man Go Ahead.Use Us.