I have a Sharp Microwave;Model # R-403 JFK; 1100-w; Serial # 440589; Manufactured Dec. 2005. The glass carousel turntable is broken. How do I get a replacement? How much will it cost? I live in Maryland. When I called Sharp, I was told that there is no such model #. I got the number from their appliance. I also see on your web-site there are other customers with the same model #. Thanks

You may have a defective turntable motor, a defective turntable motor coupler, or a defective turntable roller assembly.

You can find helpful Parts diagrams and order Sharp parts from Sears here:

http://goo.gl/zWz6Bz

Sears Parts Direct has the parts diagrams and many parts for the R-1505 microwave. The glass plate is part 4-3 ($33.99) on this page: http://www.searspartsdirect.com/partsdirect/part-model/Sharp-Parts/Microwave-Parts/Model-R1505/0958/0123370/50019999/00001?blt=06&prst=&shdMod= .


Without more tests, I can't be completely positive but the turntable motor is the likely problem. That is part 1-4 on the list above. However, it could be a wiring problem with the wiring to the turntable motor.

Partstore.com has many of the parts as well: http://www.partstore.com/Model/Sharp/Sharp/R1505.aspx .

I hope this helps.

Cindy Wells

Hi and welcome to FixYa, I am Kelly.

The glass turntable tray part number is: NTNT-A108WREZ ($26.18) Cheapest NEW one I could find:
http://www.partstore.com/Part/Sharp/Sharp/R410LK/Sharp/Sharp/NTNTA108WREZ/New.aspx

Image search of the PN above:
http://www.google.com/search?q=NTNT-A108WREZ&rls=com.microsoft:en-ph&oe=UTF-8&startIndex=&startPage=1&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&hl=en&tab=wi&biw=1003&bih=587

Thanks for choosing FixYa,
Kelly

Looks like you have the purchase the glass tray in order to get the coupler. I would give Reliable Parts a call though phone # is 1-800-666-0313. Give them your model number and the name of the part you need.

Check with www.microwaveglasstrays.com (Martin Microwave Inc.) 1-877-894-0035

The original replacement tray (Sharp part # NTNT-0048MRF0) has been out of production for years and nothing else will fit, however, Martin may have a used replacement. If they don't have it, no one will!

Look at the owner's manual of similar Kenmore models there does not seem to be a setting that allows you to turn off the turntable. However if your microwave (sorry but I couldn't find your exact model number online) has the time of carousel that has a lift out glass plate with a notch (hub) in the center of the bottom side then you effectively turn of the carousel my removing this glass plate. (see pg 4 of the manual - above link) You can place a normal microwave safe plate in the microwave in it's place. Make sure to leave the rollers in place...just remove the turntable.

u can try www.partstore.com
but the tray roller is pretty much univeraql if you have problems finding it for that model alost any sharp tray roller will fit the unti
i just grabbed one out of the dump for my personal un it and it works fine

Well to fix this problem you need to take it to a dealer.He will have tools to stop it from leaking.

The tray is Sharp part # NTNT-A011WRF0 or NTNT-A034WRE0. (Same part, just different numbers).

Here's the link to where you can find it...
www.microwaveglasstrays.com

Sharp calls that the turntable coupler when it's a separate part.

If it's part of the the part with three legs, that is called the turntable support.

You can order Sharp parts from Tritronics at http://www.wehaveparts.com

If yours is model R1610, we actually have that full service manual on our site at http://www.microwavedisplay.com/r1610_sm.pdf

We're happy to help and we appreciate your thoughtful rating of our answer.