My Canon mp730 memory holds a fax- how do I retrieve it?

Bonjour g_zeine
Tu peux y arriver en t?l?chargeant printfab : http://www.printfab.net/ mais ce n' est pas gratuit .
Cordialement ,
fanaudi .

the cartrige has become faulty or the wire strip that connects to the cartrige holder is comming out or a wire in the strip is broke , a new cartrige would then do the same thing

Sounds like you need a printhead, QY6-0064-000 around $40.00. The only other thing that could do that is the purge assembly if it's not cleaning the black part of the printhead properly.

You need to download the proper drivers for this model.

If you do not have the software, you need to download the software from one of the following locations, chose your model, select OS version, and chose to download DRIVER file for your printer:

Official Canon Drivers and Software

Canon USA:DRIVER & DOWNLOADS

After downloading is finished, unplug the printer USB and run the software that you just downloaded.
The software installer will tell you when to connect USB.

Here is also the manual, click on the picture:

From Canon download page download driver for your OS and install it.
Download and follow instructions in user manual too

I used this page instruction with success.
Let know by your rating if works for you

no. not compatible (yet)

Mp730 has got no chips on the front of the cartridges, Cart is Jammed in normally due to the Carriage Unit or the Logic Board not the Cartridge.

Hope this helps

i cannot perform any functions because the alarm light is flashing

You can get the MP 730 for Data Bazaar for 120.00 with no shipping charges. Hard to pay 160.00 for a repair when a new one is so much less. Just FYI.

Gina