I need to know how to connect my fax to my computer.

A voice over Internet protocol device, magicJack allows you to make and receive telephone calls from your computer using a USB device. While magicJack does not officially support sending and receiving faxes, you can connect a regular fax machine to the magicJack device to send and receive faxes.
Attach the magicJack device to a USB port on your computer.
Connect the phone wire to the port at the end of the magicJack device.
Connect the other end of the phone wire to the "Input" jack on your fax machine.
Turn off error correction on your fax machine, and set your fax machine to the lowest possible transmission speed. Consult your fax machine's user guide if you do not know how to turn off the error correction or lower the transmission speed on your fax machine.
Send a fax to your magicJack phone number to receive a fax. You can find your magicJack phone number at the top of the magicJack splash screen that will display on your computer after inserting the magicJack device.
Send a fax from your magicJack by loading the fax you want to send into your fax machine and pressing the "Send" button.

THIS FAX WITH COMPUTER SETTING

I hope this installation/setup guide will help you [Click Here]. If I am right, you don't need a phone cord to connect the printer and the computer, but a USB cable. If it's in case of Fax, you would need the phone cord to connect the line to the printer/fax machine.

If you need further help, let me know.

Good Luck.

Thanks for using FixYa.

Printer drivers can be downloaded from Brother-usa.com, assuming you're in the USA. Pick your computer''s operating system and download the driver for your Fax 2820 here.

The intellifax-770 deffinetly cannot connect to a PC. There are several other models that can, but not this one.

can you help me to figure out why i'm not receiving faxes thru my fax machine that is connected to my computer...i am dumb so i dont know what is waht all i know is that i think i have to unplug the phone in the home too get a fax...i can send them and cant receive them...i have an answere machine but it is torn up do i need to get a new answer machine...please help and thanks

Even though you have internet, have you connected a phone line? Most fax machines/software rely on the phone line. I don't know how you are sending a fax. If you are sending a fax directly from an all-in-one, you'll need to connect the phone line to the back of that device. If you're sending a fax using a program on the computer, you'll need to connect the phone to the back of the computer.

You can temporarily disconnect your land-line phone and connect it to the all-in-one or computer. Just remember to reconnect it when you are done so you can receive phone calls.

I hope this helps!

When there is no phone jack you have to connect to your computer with USB cable. You will need fax software loaded on your computer and faxes can be sent via the internet.

Typically, a fax machine is connected directly to a telephone wall jack with a known working connection. Try plugging the fax machine directly into a wall jack first and pick up the handset on the fax machine if it has one. You should get a dial tone. Then try to fax something to someone you know.

The machine can also usually be routed through the modem in a computer by connecting the "line" cord on the modem to the wall jack and plugging the fax machine into the the "phone" jack on the modem. You may need to install the software that came with the fax machine to get this to work.

If you have no dial tone, check the wall jack with a known to be working single line phone. If there is a dial tone, it's something to do with fax machine, the computer modem or the connections.

Some fax machines can take advantage of internet faxing through a cable modem or DSL connection. Check your manual for the options available.

the first thing you do is install the software before you connect the printer, the software will tell you when to connect the printer. after that just follow the instructions.