Question about Linksys WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2)
Hi there ...
your isp is at&t? please verify the ip address straight to the modem if its is 192.168.1.1 and if your modem from your isp is set to DHCP or BRIDGE mode.
IF IP address is 192.168.1.1 (DHCP)
... change the LAN IP address of the router to 192.168.2.1 or 5.1 to prevent any IP conflict
by doing this :
1. access setup page of router usually 192.168.1.1
2. under setup tab look for the ip address, change it, then save
3. click on the status tab , and look for a VALID ip address
IF MODEM is set to BRIDGE mode
.... please ask username and password from your ISP coz we would need to set your router to PPOE...
1. access setup page
2. under setup tab look for INTERNET CONNECTION TYPE
3. select PPPoE
fill in username and password
4. click on status tab
look for LOG in TYPe ===> click CONNECT
if connected : check a valid IP address
if authentication failed verify again your username and password from your ISP
Posted on Nov 13, 2008
Tips for a great answer:
Sep 08, 2010 | Siemens SpeedStream Modem (4100) (SS4100)
Jun 10, 2010 | Computers & Internet
May 25, 2009 | Linksys WRT54G2 Wireless Router
Apr 25, 2009 | Motorola Computers & Internet
Apr 16, 2009 | 2wire (1000-000057-000) Modem
Jan 12, 2009 | 2wire HomePortal 1000HW DSL Modem and...
Jan 05, 2009 | NetGear WGR614 Router
Apr 30, 2008 | AT&T High Speed DSL Modem
Nov 15, 2012 | Linksys WRT54GX2 Wireless-G Broadband...
634 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: