Question about Sony Cyber-Shot DSC-S90 Digital Camera

1 Answer

Sony cyber shot dsc-s90

Can you send me a schematic of the lens mechanism? Its closed ans will not open

Posted by Ron on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I don't have one,

did you get sand in it? that's what happened to mine and i opened it up and took the sand out. piece of cake!

but ir sounds like you might have a motor problem... that different. good luck!

Posted on Aug 07, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my Nikon Coolpix S4000, when power is turned on, the lens extends fully, opens, retracts fully, and then closes automatically. Lens Error then appears. It does not make noises and has not been used...


I had the same problem with a similar Coolpix model. It's an error on the lens mechanism. Maybe you pressed the lens by accident while they were retracting, or something like that... It's really a delicate mechanism. I think you have to send it for a service... Sorry!

Mar 15, 2014 | Nikon Coolpix S4000 Digital Camera

1 Answer

Lens Cover not fully open


It sounds like a problem with the firmware in the camcorder itself. As an authorized Sony repair person, I have gotten no technical bulletin on this model. The firmware is preloaded into the microprocessor IC. You will need to have this unit looked at by an authorized Sony repair center who specializes in camcorder repairs or send the unit to a Sony factory service center. good Luck

May 22, 2007 | Sony Handycam HDR-HC1E HDV Digital...

1 Answer

I have a hasselblad 503cx. when i hit the shutter button, the back part of the lens opens (where the film is) but the lens shutter is closed. when i let go, the lens opens and the back closes.


The proper order of exposure should be:

Curtain opens/Lense stops down (unless wide open)
Lense shutter closes
When releasing button, curtain closes
When winding, lense shutter opens

If this isn't what's happening, something is wrong. There is only a simple mechanical screw connection between body and lense, so it'd have to be an issue with the gears in the body.

May 21, 2011 | Hasselblad 503CX Medium Format Camera

1 Answer

IT FAIL AND IT IS MAKING CLICKING NOISE WHEN I TURN IT ON. IT GIVES ME A MESSAGE "LENS ERROR "


Usually that means that you have a bit of grit in the lens mechanism and the camera recognizes that it is taking too much force to open or close. The clicking noise is the camera trying to extend the lens for use. If repeatedly switching the camera on and off fails, you are at a crossroads. You can send it to a repair facility to have the grit removed (assuming the unit hasn't be come damaged in the process). Or, you can take a substantial risk and try to "help" the lens open or close by wiggling or pushing lightly on the lens mechanism to try to loosen the grit. The risk is that you'll break the mechanism for good. I have taken this risk and won, but it's a chance you'll have to decide to take on your own!

Nov 28, 2010 | Nikon COOLPIX S630 Digital Camera

1 Answer

Shutter will not operate in bright sunlight


It is more likely that the problems is in the lens and not in the camera body.

This usually happens when the iris mechanism in the lens is not closing/opening properly. It may be a mechanical or electrical failure in the lens.

The easy way to confirm it is using other lens and test the camera. If the lens is defective, you have the options of send it to a repair center to fix it, or get another lens for your camera.

I hope this helps you to define the problem.

Best regards,

Jul 10, 2009 | Canon Rebel XT / EOS 350D Digital Camera

2 Answers

My camera keeps on saying lens error and it wont turn off or on.


the lens error is usually a sign that the opening mechanism failed .
try to reset it manually (push VERY SLOW on the lens cilinder to help it close)
if it is an expensive camera you can send it to the manufacturer for repairs as a better and safer 
solution.

Sep 14, 2008 | Cameras

1 Answer

Coolpix lens opens retracts opens then closes again and lens error appears


Hello

When you turn the camera on the lens comes out and has parameters when extending to focus, if the lens does not open fully it sees a problem and then closes.

there are tiny plastic gears inside and may have chipped or a piece of sand got in causing the lens to jamb. "very fragile"

one solution is to ask a camera repair shop how much a lens mechanism would be to replace. (if cost is more than 1/2 of what you paid dont bother)

another solution is to have someone sell your camera on an auction site for parts, to make some money towards another camera purchase

Aug 26, 2008 | Nikon Coolpix L11 Digital Camera

2 Answers

Nikon coolpix p2 lens error


You can disassemble the lens and clean the dust. Here are some photos of the disassembled P2 Lens http://fixit.limewebs.com/p2/

Aug 21, 2008 | Nikon Coolpix P2 Digital Camera

1 Answer

Camera lens cover is sticky


Try blowing lots of compressed air around the open lens shutter to clean the mechanism. Or use a hair dryer for a few seconds (don't want to heat up the camera). Also with the lens barrel extended and pointed downward, tap the lens barrel with a pencil while you extend and retract the lens by powering the camera on and off. A grain of sand in the mechanism is usually the culprit, and you want to try to dislodge it.

You can open it up, but only as a very last resort. The above procedures usually work if you try them enough. But for those particularly nasty stuck mechanisms, here's an example repair on a Canon Powershot A400 (do this at your own risk):
http://camerarepair.blogspot.com/2007/11/repair-of-stuck-lens-covers.html

Jul 27, 2007 | Casio Exilim EX-Z55 Digital Camera

3 Answers

Lens cover


I know this is an old post, but for those who want to fix it themselves: try blowing lots of compressed air around the open lens shutter to clean the mechanism. Or use a hair dryer for a few seconds (don't want to heat up the camera). Also with the lens barrel extended and pointed downward, tap the lens barrel with a pencil while you extend and retract the lens by powering the camera on and off. A grain of sand in the mechanism is usually the culprit, and you want to try to dislodge it.

You can open it up, but only as a very last resort. The above procedures usually work if you try them enough. But for those particularly nasty stuck mechanisms, here's an example repair on a Canon Powershot A400 (do this at your own risk):

http://camerarepair.blogspot.com/2007/11/repair-of-stuck-lens-covers.html

Jan 16, 2007 | Casio Exilim EX-Z120 Digital Camera

Not finding what you are looking for?
Sony Cyber-Shot DSC-S90 Digital Camera Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Harrie

Level 3 Expert

6740 Answers

NOEL
NOEL

Level 3 Expert

8546 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...