I lost the user manual

It was ages ago I used my ZR5800. Looks like the 3000.
I only have the device and some old flash cards. Most of my data was coppied to the flashcards. I lost my manual, but I'm sure you could connect by infra red to a laptop. or another IR device.
The flashcards worked in the old laptops, so if you have an old laptop, check if you can put the flashcards in and if you can connect via IR.

Any of you have this software or any software for the Zaurus. Also I use with my 5700 a USB PCMCIA card reader for backup. But with my 3500x I have no way of backing it up sadly (do not have data cable or software). But i know there was years ago a site with software for the Zaurus (games etc).

Hello
Get into this site and download the user manual for your Sharp TV. It is an absolutely free download site.
www.retrevo.com > Sharp Manuals > Sharp TV Manuals
OK.

The easiest way to access this would be to replace the batteries, and gather the notes directly from the device. Syncing it to a PC is outdated and would require very old hardware. I'm sorry to hear about your loss, I hope this information helps.

I have lost all comm ports for exchanging info to and from my Zaurus 5000. It says my ports are being used by my mouse which is not true.
Anyone have any ideas on how to retrieve ports?

Ted

You can down load the manual on the link below.

http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Good Luck and please rate 4 thumbs for the free answer

Have you tried Hyperterminal. It is included with WinXP. Look in the communications menu in accessories.

You may also try Sharp's website to see if there are any downloads for the ZR-AP2C

please email me your win95 software (or post it to my address if you can copy it to CD) and I will convert it for you using some software tools that I have.
my email address is [email protected]
thanks

On the back of the unit, there is a battery selector switch. Move the selector to the 'replace batteries' position. Now you can open the main battery compartment. Adjacent to the main compartment is a smaller hatch secured by a small hex-head screw. Loosen and remove the screw to remove the hatch cover. Then you can remove and replace the old 2032 battery with a new one. Reverse the procedure to secure the hatch, ensure you have fresh batteries in the main battery compartment, replace the main hatch, select 'normal operation' and you should be good to go.

I have a zr 3500x with all the manuals, box etc - no power cord, did it come with one? is this product still viable? i never really used it, and just took it out of the box to see if it was worth keeping. please give me your opinion on it, and tell me what info you need from the manual.