How do u connect the amp

The manual for the Volfenhag ZX 7190 amplifier will provide the specific instructions for connecting the amp to your system. Here are some general steps for connecting a car amplifier:

1. Connect the power cable: Run the power cable from the battery to the amp, making sure that it is securely connected.
2. Ground the amplifier: Connect the ground wire from the amp to a metal surface in the vehicle, such as a bolt on the chassis.
3. Connect the RCA cables: Run the RCA cables from the head unit or source device to the amp, and connect them to the input jacks on the amp.
4. Connect the speaker wires: Run the speaker wires from the amp to the speakers, making sure to match the positive and negative connections.
5. Turn on the amp: Turn on the amp by switching the power switch to the on position.

It's important to make sure that the amplifier is properly connected to avoid damaging the amp or your vehicle's electrical system. Additionally, you should also refer to the manual for your specific Volfenhag ZX 7190 amplifier, as the connection process may vary based on the model and features.

You might have some viruses and malware.

Start your PC and press F8 several times until the boot menu comes up. Then select "Safe Mode with Networking". Now get some or ALL of the FREE programs below.

Download, Install and Run Malwarebytes Anti-Malware:
http://majorgeeks.com/download.php?det=5756
When Installing choose the non-pro version.

Download, Unzip, Install and Run TDSSKiller:
http://majorgeeks.com/Kaspersky_TDSSKiller_d6895.html

Download, Install and Run Super Anti-Spyware:
http://majorgeeks.com/SUPERAntiSpyware_d5116.html

If you have an outdated Anti-virus program then Download, Install and Run Avira Anti-Virus:
http://majorgeeks.com/Avira_AntiVir_Personal_-_FREE_Antivirus_d955.html
Make sure to select ALL of the "threat categories" when you install or configure Avira...

You should be in pretty good shape if you run and install all of these programs.

marwan karm bekhet hesen mahamd

Yahoo Customer Number USA 1-844-414-4869

Checking virtual IP servers...
[VIP Raw] Resolving host name vcs1.msg.yahoo.com... [PASSED]
[VIP Raw] Connecting to Virtual IP server 98.136.48.32... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12029' ***
[VIP Raw] Resolving host name vcs2.msg.yahoo.com... [PASSED]
[VIP Raw] Connecting to Virtual IP server 67.195.186.241... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12029' ***
[VIP Raw] Resolving host name 98.136.48.100... [PASSED]
[VIP Raw] Connecting to Virtual IP server 98.136.48.100... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12029' ***
[VIP Raw] Resolving host name 98.136.48.110... [PASSED]
[VIP Raw] Connecting to Virtual IP server 98.136.48.110... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12029' ***
[VIP Raw] Resolving host name 67.195.187.228... [PASSED]
[VIP Raw] Connecting to Virtual IP server 67.195.187.228... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12029' ***
[VIP Raw] Resolving host name 67.195.187.229... [PASSED]
[VIP Raw] Connecting to Virtual IP server 67.195.187.229... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12029' ***
[VIP Raw] FAILED
*** 'COMPONENT_TYPE_YCP' YCPError: 'YMSG.ColoSelectionFailed' ***
Checking HTTP virtual IP servers...
[VIP Http] Resolving host name httpvcs1.msg.yahoo.com... [PASSED]
[VIP Http] Connecting to HTTP Virtual IP server 98.136.48.229... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12029' ***
[VIP Http] Resolving host name httpvcs2.msg.yahoo.com... [PASSED]
[VIP Http] Connecting to HTTP Virtual IP server 98.139.61.47... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12029' ***
[VIP Http] Resolving host name 216.155.194.137... [PASSED]
[VIP Http] Connecting to HTTP Virtual IP server 216.155.194.137... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12029' ***
[VIP Http] Resolving host name 98.136.112.142... [PASSED]
[VIP Http] Connecting to HTTP Virtual IP server 98.136.112.142... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12029' ***
[VIP Http] FAILED
*** 'COMPONENT_TYPE_YCP' YCPError: 'YMSG.ColoSelectionFailed' ***

1st thing that you have to check is the connection of your printer and your computer. is it USB? or Wireless?
For USB installation follow this steps (note: this is general installtion for all HP printers)
For win xp operating system follow this link: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02283843&lc=en&dlc=en&cc=us&lang=en&product=3737195&key=null&site=null
For win vista operating system follow this link: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02283673&lc=en&dlc=en&cc=us&lang=en&product=3737195&key=null&site=null
For win 7 operating system Please follow this steps: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02282602&lc=en&dlc=en&cc=us&lang=en&product=3737195&key=null&site=null
now if your done installing all the software and you are using the usb cable to connect it to your computer, but now you want to change the connection using wireless (infrastructure) Follow this steps
The printer should be connected to the network first! (this step is for all printers that has a wrench button on the front panel)

• press the wrench on the front panel
• look for network/wireless menu
• press ok
• look for wireless setup wizard
• press ok
• it will search for available networks in your house
• you need to select your network, then press ok
• it will attempt to connect, then it should be connected

if the printer is connected to the network you should have the message "connected to the network"
If your printer is connected follow this steps:

• go back to your computer
• run the disc
• click on "add a device" button
• it will ask you to select the type of your connection
• choose the wireless connection (802.11)
• then just follow the steps on the installation wizard
• you should be connected by now

If you cannot connect to the network, maybe this is an issue with your firewall (windows firewall or anti virus firewall) download this tool to check if the settings on your network: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3737195#N795
download the Network diagnostic utility
Congrats in advance! :D

If this amp has an AUX input , use that to plug the phono pre-amp into
and clarify what you mean by "power amp end"
Thanks

Hi,
To pair with another Bluetooth device follow the steps below:
Place the Bluetooth device in discoverable mode
From the Home menu screen , touch the Main menu tab, located at the bottom
Touch Settings
Touch Bluetooth
Touch Bluetooth On, unless already on
Touch Trusted Devices
Touch on the desired Bluetooth device
If prompted, enter the PIN, using the keypad (Default is “0000′ unless changed)
Touch Done
The handset will display “Connecting” followed by “Connected”
After a successful connection is made the handset returns to the Trusted Devices screen
Press the Home functions key to return to the Home menu screen
Try the steps yourself now.

will be expecting your comment.

Take care.
<a href='http://neverstill.com/openx/www/delivery/ck.php?n=aa90d9b4&cb=INSERT_RANDOM_NUMBER_HERE' target='_blank'><img src='http://neverstill.com/openx/www/delivery/avw.php?zoneid=25&cb=INSERT_RANDOM_NUMBER_HERE&n=aa90d9b4' border='0' alt='' /></a>

Activate and connect to a WLAN
1.In range of WLAN network, access an application or menu that needs a wireless connection.
2.On the Home screen, press <Start> → <More> → Settings → Connections → More... → Wi-Fi.
3.Press <Menu> → Turn On Wi-Fi.
The device will display available WLAN connections.
4.Select a network profile from the list.
The device will attempt to connect to the WLAN.
5.Select a network type and press <Next>.
6.Enter a pre-shared key for WLAN and press <Next> or <Finish>.
7.Set the IEEE 802.1x access option and the extensible authentication protocol (EAP) type and press <Finish> (if necessary).


Create a new WLAN
1.On the Home screen, press <Start> → <More> → Settings → Connections → More... → Wi-Fi.
2.Select New...
3.Enter a network name, configure connection settings, and press <Next>.
4.Enter network authentication settings and press <Next>.
5.Set the IEEE 802.1x access option and the extensible authentication protocol (EAP) type (if necessary).
6.When you are finished, press <Finish>.

I connected the red & white audio leads to the line out sockets on the equalizer and connected them to the tape rec sockets on the amp..