Error code i30 what is it - AEG 24 in. Favorit 80860iW Built-in Dishwasher

Help in the link

P0720 2000 INFINITI I30 Code Vehicle Speed Sensor

https://www.autocodes.com > p0720_2000_infiniti_i30
Diagnostic trouble code is detected when Transmission Control Module (TCM) does not receive the proper voltage signal from the sensor. 'What are P0720 2000 ...
Missing: miss ‎' Must include: miss

More here

https://www.google.com/search?q=2000+infiniti+I30+miss+shifting+code+P0720

..

Hello Roberta, I appreciate your submission!
Based off the information you have provided me your Frigidaire dishwasher is displaying an error code of "I30". Error code "I30" means you could be experiencing an issue within the aqua control, which means it could be your water valve, water line, or control panel. You may need to reach out to your manufacturer for additional assistance. I hope this information is helpful. -Matt

Hello friend, I appreciate your inquiry!

Based off my understanding your dishwasher is displaying an error code of I30. An I30 error code means this could be an issue with your aqua control. I would suggest performing a reset on your dishwasher and you can do that by flipping the household circuit breaker off for at least ten minutes. If you continue to receive an I30 error code after the reset I would recommend having a professional technician out. This will help you avoid any unnecessary part purchases. Hopefully this information is helpful to you. -Matt

I think this is not the error code. I belive this is hardness of water (could be set from 0 or 1 to 10, depending of model. Read your user manual how to exit the program for adjust the water hardness).

Error code for your appliance depending on model and look like:
i10, i20,i30............ or
C1, C2,C3.............

Dado

Hello friend, thanks for your inquiry!

On your Frigidaire dishwasher "i30" stands for aqua control. You should perform a reset on your dishwasher and that could clear any false error codes. To reset your dishwasher you can flip the household circuit breaker off for ten minutes. If that does not work you could be experiencing an issue with your water inlet valve or control panel. I hope this information has been helpful. -Matt

Good Afternoon Friend,

I understand that you are receiving an i30 error code on your Frigidaire dishwasher. I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 20-30 minutes. Restore power and start your dishwasher. If this does not correct the i30 error code, I suggest you contact your local authorized technician for further assistance. Hope this is helpful.

-Best Regards-
WP

Not familiar with this particular model but the indication is for water in the very bottom of your unit. Either due to a leak or a faulty switch. A quick leak check is to tip your unit to the side and see if water dribbles out of the bottom. Side needs to come off and either find and fix the leak or replace the switch itself. If its just a leak and you tip the water out it will actually work till the leak fills up again.

Do you know what is error i10 ? I have same