I would like to know how to change the sender's name and fax number on my Canon L220 Plain Paper Fax Machine.

Dear Customer,

Please download the Canon L220 Plain Paper Laser Fax Manual from the link provided below :

http://www.canon.co.uk/Support/Consumer_Products/products/Fax__Multifunctionals/Laser/Fax-L_series/FAX-L220.aspx?DLtcmuri=tcm:14-737644&page=1&type=download

After opening the link accept the user agreement and click on the download button.

Click the link below to open the guide in PDF format:

FAX-L220/L295

Hi there!Please make sure that the line is pluged into the"L" Socket on the machine and it will go back to normal!Good Luck!

My fax L220 Canon will not receive fax

press function and then recieve mode,keep pressing recieve mode till u get to fax only!Or press function and data registration,press set!Go to rx settings with the arrow down and press et!Go to rx mode and press set!Use the arrows to get fax only mode!!Good luck!

To change outgoing name and address, use the following procedure:

1 Press Function.
2 Press Data Registration.
3 Press OK twice
4 Use UP Down arrows to select Unit Telephone #
5 Press OK
6 Use the numeric buttons to enter your fax/telephone number (max. 20 digits,including spaces).
• To enter a space, press Function
then Space. Spaces are optional
but make the number easier to
read.
• To enter a plus sign (+) before the
number, press #.
• If you make a mistake, press C and
re-enter the number.
7Press OK twice.
8 Use the numeric buttons to enter your name or company name (max. 24 characters, including spaces).
9 Press OK.
10 Press Stop to return to standby mode.

Below is a link to your L=220 User Guide:

Canon L220 User Guide

I hope you find this answered your question. Best of luck to you!
Greg

MANUAL download should help you

You need to service machine and may be your fixing unit is problem

> If that replace Fixing Unit

the MANUAL should answer your question

I need the operating manual of Canon L220