1998 73" Mitsu diamond the RBG/HV Im trying to

Contact Arris Support ARRIS for Consumers

Mark
Motorola Support

The outer screen on most models is clear and called a protective screen and prevents glare---if it has that it has 2 more screens behind it.

Getting at the outer on is not so easy---the entire frame for the screens has to be removed, the inner screens removed to get at the outer screen to remove it (if 3 screens you can do without the outer one except if it got scratched before--next will be the next screen behind it.

Check with mitsubishi to see if the screen that is damaged is available or not.

use the RCA ( yellow, red& white) cables, put on video input

hi there

there are three cable yellow red and white your yellow
cable is the picture cabe and your red and white cabe is the sound cabe plug the yellow cabe in the yellow input and the white and red in the red and white input @ the back ok you recorder now the some go to the tv set it will work 100% now

COMP 1 and 2 are for 480i/p sources. Hook it to the 1080i capable on the back. Also make sure the HD DVR is outputting 1080i not 720p. The Mits can not disply 720p and will show a scrambled screen if you try to.

post the model number, its located on the back of the tv

for more info ctechnicians.com

get a component cable

you can try vancebaldwin.com or MCMelectronics, or Tritronics.com

1080p signal... THE MITSU. WD-65731 has a resolution of 1080p its just the res your PS3 is pumping into your screen is loaded with a little bit more pixels than you 1080p res MITSU. I suggest getting a MITSU WD-57731 since it has a 1080P/24 input. and has great clarity and HD ample for the BD of your PS3. however the differences in picture rate and quality is very small. goodluck.