Use MFC-465CN withou cartridges

Clean contacts, check level. Is it OEM or a refill cartridge???

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.


If you need any technical help on printer then you can reach at http://www.vtechsquad.com/

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

Original source: http://ij-forum.blogspot.com/2008/12/error-message-check-ink-u162u163.html#ixzz2Cpr4Be1K
This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

Original source: http://ij-forum.blogspot.com/2008/12/error-message-check-ink-u162u163.html#ixzz2Cpr4Be1K

When my fax machine does this, it prints out an error code. Most of the times it's "Poor transmission" or "Bad line". I can duplicate the problem by trying to fax out on my VoIP line instead of my regular land line.

Anymore today, it's usually easier to scan and email the document. I can e-fax the scan if I'm sending it to someone without an email address.

Carl

Welcome to Fixya.

Please follow the link specified below as this will direct you to Brother's site where you can view/download the comprehensive user's manual :

MFC-465cn Manual

You will learn how to make the most out of your printer by going through this.

Thanks for using Fixya.

If you clear the memory, any faxes stored will be also be erased. This solution assumes that you have the fax storage option "On" to store faxes in memory.

On the control panel:

1) Press <Menu>

2) Use <Up> or <Down> arrow keys until "Fax" appears on the display, press <OK>

3) Use <Up> or <Down> until "Remote Fax Option" or "Advanced Fax Operation" appears, press <OK>

4) Use <Up> or <Down> until "Off" appears, then press <OK>

5) You will be prompted: "Erase all fax?" 1. Yes 2. No

Press <1> to erase all faxes in memory.

6) Press <Stop/Exit> to return to normal function

Review page 65 in your manual. Changing the "Advanced Fax Operations:"

If received faxes are left in your machine's
memory when you change the Advanced Fax
Operations, the LCD will ask you one of the
following questions:

Erase All Fax?
Yes - Press 1
No - Press 2

Print All Fax?
Yes - Press 1
No - Press 2

• If you press 1, faxes in the memory will
be erased or printed before the setting
changes. If a backup copy has already
been printed it will not be printed again.
• If you press 2, faxes in the memory will
not be erased or printed and the setting
will be unchanged.

you need to check if you have a valid printer driver and make sure you have no pending docs

you need to do a hard reset on the printer as well it might clear up the problem and recognize the ink at its proper levels.

refer to your user manual or let us know and we will find the procedure to do so.

i have a similar model and know how picky they can be.

Non. C'est ne pas possible avec le mfc240c. Vous besoin un mfc 440cn/465cn qui a cette function: mfc(fax) ->PC( a dossier ou voir et/ou effacier) -> imprimer.

(excuse moi, mais je ne parle pas beaucoup de francais!)

http://journal.drfaulken.com/trick-your-brother-inkjet-into-working-when-an-ink-cartridge-runs-dry/

This works like a charm!!