I've installed Windows 2000 and applied ALL updates from Microsoft. I want to use wilreless adapter WG111 USB 2.0 and installed the software and connected the USB. BUT, the software wizard won't start and got a message during the install that this software does not contain a microsoft digital signature. Tried in windowsupdae.microsoft.com and no luck.
I followed the cd and did everything it prompt me to do. I get good reception between my computer and the other router but the network is not connecting. It also say that there is something wrong with the parameter, help?
The error you get from Windows about the digital signature is normal. This only means that windows hasn't tested and approved it. just as the Netgear guys will tell you, the wireless adapter is compatible and will work fine. When you get that message, you'll usually allow it or continue with the installation.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
What are the system requirements for using this printer?
PC Compatible Requirements - An IBM
(r) compatible PC with at least a 486/66 MHz (for Windows 98) or Pentium
(r) 133 MHz (for Windows 2000) processor (Pentium or higher processor
recommended) - Microsoft (r) Windows 98 or Windows 2000 - At least 16MB (for Windows 98) or 32MB (for Windows 2000) of RAM (32MB for Windows 98 or 64MB for Windows 2000 recommended) - 50MB of free hard disk space (100MB or more recommended) - VGA or better display adapter and monitor - CD-ROM or DVD drive for installing the printer software -
USB connection: a computer running Windows 98 or Windows 2000, with a
Windows-compliant USB port and a shielded USB "AB" cable up to 6.5 feet
(2 meters) long. Using an improperly shielded USB cable-especially a
cable more than 6.5 feet (2 meters) long-may cause the printer to
malfunction. Apple Macintosh Requirements - An Apple (r) iMac (tm) series or Power Macintosh (r) G3 or G4 with USB port - For iMac: Mac (r) OS 8.5 or later (Mac OS 8.5.1 or later recommended) -
For Power Macintosh G3 or later: Mac OS 8.5.1 or later If your iMac is
running OS 8.1, you need to upgrade your operating system before
installing your printer software. To find out which operating system
your iMac is running, select About This Computer from the Apple menu. If
you're running OS 8.5 or 8.5.1 on your iMac, Apple recommends that you
install iMac Update 1.1. Download the update for your system from Apple
at http://asu.info.apple.com. Contact Apple if you have problems
installing an update. - 16MB of available RAM (more recommended) - 50MB of free hard disk space (100MB recommended) - VGA display or better - CD-ROM or DVD drive for installing the printer software -
A shielded USB "AB" cable up to 6.5 feet (2 meters) long. Using an
improperly shielded USB cable-especially a cable more than 6.5 feet (2
meters) long-may cause the printer to malfunction.
Since you already did a uninstall and re installation of your adapter and still the same problem, you may want to try updating the driver of the adapter, so uninstall and reinstall the adapter using the latest driver from the manufacturers web site....