Hotpoint aquarius washing machine

I have a hotpoint washing machine if I start the machine the water it's working after filling up the water the basket doesn't spin

When a cycle is complete in my Hotpoint Aquarius washing machine, the conditioner drawer is full of water This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

fit new door interlock switch not too expesive parts about £15

check solaniod valve on water pump

I have a Hotpoint Aquarius WML540 washing machine and after the wash and the rinses, all the lights start flashing and the programme will not go any further.
I would like to know what is causing this and how to solve it.

If the machine is under 5yrs old ring Hotpoint.. They will charge around £90 to repair the machine including parts and those parts will be guaranteed for a further year...

It sounds like you have a control board issue and the control board plus labour would cost you in excess of the Hotpoint charge

F02 indicates that the motor tacho has broken or become detached, this is to be found on the end of the motor shaft.
Pleawse rate my solution.
Thanks.

Main motor needed new brushes, all working well now.

press and hold start/cancel button for 5 secs. Thenpress on /offbutton and start/cancel together until Doff is displayed the machine should now be ok

I've got the same problem, the locked symbol is showing