My globe has been working just fine until a couple of days ago. I accidently dropped my alarm (which fell on the cords behind the globe) unit and now my globe is blank. I've checked the cord connections & they appear to be fine. Any suggestions?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When it is flickering, can you still read it? Mine didn't flicker. Maybe it just needs new batteries. I did find that mine had trouble working once I switched over to AT&T Uverse internet/phone service.
for most problews, including caller id, follow these instructions in order:
Put the battery into the battery compartment and connect to the
connectors inside the battery compartment.
Connect the power adapter and telephone cord into matching jacks on the under side
of the base.
Plug the power adapter into the electrical outlet. Plug the telephone cord into the
my caller id was not working, but everything else was. I followed the instructions above EXACTLY IN ORDER and the caller id is now working.
It appears that you have already removed the 4 screws. The globe will not just fall off, it has to be pried. Take a small- bladed screwdriver or a small-bladed pocket knife and gently pry from any small opening you see between the globe and its base. Work the blade around the globe and it will come off. I just did it and now I'm trying to figure out how to get inside the "guts" of the globe. Will keep you advised.