- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure the AV Cable is connected to the [AV MULTI-OUT] port on the back of the PLAYSTATION 3 system.
Connect the other end of the AV Cable into the yellow Composite
port for video, and into the white and red audio ports (if your TV does
not have the red port, simply ignore it) on the back of your TV.
While the PLAYSTATION 3 system is in standby mode (red light on the
front of the system), hold down the touch-sensitive On/Off button on
the front of the system until the system goes into standby mode again .
(So the light cycle would go from: red light to --> green light
--> then back to red light) This will ensure that you have held
down the On/Off button long enough to reset the Video Output Settings.
Turn ON the PLAYSTATION 3 and once the system finishes powering up,
the Video Output Settings will automatically be reset to the standard
resolution (or detect the current display output settings of your
it sounds like the laser is dirty or gone try cleaning the laser or you may have to replace it
if you do have to replace it you might as well replace it with one that plays copied games
also sony will repair the unit for you as its under warranty call them for info ive had mine replaced 3 times.