I have a hotpoint aquarius 6kg washing machine, i need to cancel a progeamme and drain the washing machine as their is a sleeve caught in the door and water is coming out but don't know how to please help!

Unplug it from electric socket to see if that unlocks it.

Many or even most washing machines will not run if the door lock switch is not working. Open and close the door a few times to see if the light stops flashing. You could press on the door where the latch is and see if that makes a difference.

Have you checked the filter if fitted? Sometimes washing machines will not spin if they're not empty.

Sure, You can download from the Hotpoint site. The manual you want is here:

http://imagebank.indesitcompany.co.uk/brochures_online/pdf/Hotpoint/Laundry/aquarius-6kg-wd-19505772000.pdf

possible blockage ' filter or could aslo be water coming back from the sink if drain hose too low , you may need to raise this....

Check and clean the pump filter.
Remove lower rear panel of washer, remove large black hose on bottom of drum,remove and clean filter inside, alsr remove hose onto pump, and check for obstruction here and in the pump.
Please rate my solution.
Thanks.

Have you checked for blockage in the pump. Or the have been some problems with a ball that sits in the hose between pump and the drum. This can block the water. Check this berfore purchase new pump.

If you spin the drum by hand, and it is niosy and rumbling then the main drum bearings have failed.
If under 5 years old, then you should be able to get it repaired under Hotpoint 5 year guarantee, You just pay for labour and call out, cheapest option, it is not really a D.I.Y job, as it is quite involved, and entails a lot of work.
Please rate my advice.
Thanks.

the noise is the pump trying to turn take it off, and check it for something caught in it a coin or some object bye eire