We have an Hp Laserjet M3035 mfp. It has previoulsy been used and another location and had the "administration" options disable on its device console. We do not know the IP address of the embedded Nic and cannot control the printer. A cold reset has not returned the Admin menu to the console screen, or reset the IP address of the on-board card. How do we reset the formatter board or the IP address of the embedded NIC to revert to DHCP when we cannot access any control option

Hi, you must first install the scaner driver in order to scan from computer, then follow the steps from it

Read the manual.
If you do not have one download from the HP wwebsite

I accessed the printer thru the web interface>Log In>>Digital Sending>Send to Folder Settings and under the Notifications I changed it to Print . It was set to Email Sender. We don't email from scanners not sure where that setting is located.

HP LaserJet M3035 MFP Series
Method used to deliver notification: Print

try to calibrate the printer from menu ,you have to use good toner cartridge

You may download the driver from here.

HI, it is a sensor problem!

You have to configure the digital sending option, if coping is happening..through wording we cannot express to configure, on line chat is the best method due to permissions required to configure..

install the scanner software on your cd hp and then in Word go "insert+image+scanner"

Try replacing the toner if you have another one, even old one should be ok to test, if not the look at the toner drum and see if there is any marks on it.

Assuming your scanner is installed already, what you need to do is log into Windows Photo Gallery (Vista) and click on FILE at the top left. When the drop down bar engages, you should look for IMPORT FROM CAMERA OR SCANNER and click it. Then a new window will open up and you'll have to pick your device (HP Laserjet M3035). At this point check your settings, and make sure your scan is ready, then click on either PREVIEW or SCAN. Then when it is done scanning, you will have to go to the folder you saved it in to view it. (Xp Similar)

Hope this helps.