Ihave a conon mx700 and the fax tone rings when I get a phone call

Step by step information at the link below.
Brother Fax T96
The F/T Mode is used to allow the fax machine and the telephones to share the same telephone line. When a call comes in, the fax machine and all extension telephones on that line will ring according to the number of rings you have set for the Ring Delay.
When the Ring Delay is completed, the fax machine will answer the call and determine if it is a fax call or a telephone (voice) call.
The fax machine can determine this by the signal it is receiving on the telephone line. If someone is sending a fax automatically , the sending fax machine will transmit a fax tone (a series of beeps every 3 seconds).
If your fax machine hears these tones, it will receive the fax.

If the fax machine does not hear any fax tones, it assumes it is a telephone (voice) call and will begin ringing the F/T ring tones (double ring) for the length of time you selected for the F/T Ring Time. These tones will only ring on the fax machine's handset (extension or external phones will not ring). At the end of the F/T ring time the fax machine will go into the receive mode in order to receive a manual fax.
(If the call was a voice call and was not answered, the caller will hear the fax receive tones also).

• If you answer the call before the fax machine(during the ring delay period) and determine it is a fax, you can transfer the fax to the fax machine for receiving.
  
  
• If you answer the call on an "extension" phone and hear a beep every 3 seconds (automatic fax) or silence (manual fax), press *51 or *91 for New Zealand (remote activation code) on the telephone keypad, wait to hear the fax machine turn on (chirping sounds) and then hang up.
  
  
• If you answer on the handset of the fax machine and hear a beep every 3 seconds or silence, press the Fax Start or Start/Copy key on the control panel of the fax machine and then hang up the handset.
  
  
• If you answer a call on an "extension" phone during the F/T Ring Time, you will hear the F/T ring tones.
  To release the call from the fax machine, press #51 or #91 for New Zealand (remote deactivation code) on the telephone keypad and you can speak to the calling party.
  
  
• If you pick up the handset of the fax machine during the F/T ring time, you may talk to the calling party immediately.

you have a problem with the drivers that you've installed.

need to set the ring tone for 6 ring how can i fix it.

No.

Hi!
If there an kind of button of volume then u can...
otherwise u can't..
Amit

You can set dial preferences in fax options using the 0 for the switchboard.

I can not received fax from my mx 700 when why answering machine is on.

Send will work on any phone lines
fax machines are often set to only answer 'secondary' ring tones, double triple or higher. When the line was repaired the phone company may have dropped the special tone off your secondary fax line number, fax will not answer without that tone.
Check in the fax answer settings, what the ring tone is, specific instruction on menu settings in your user guide,
Ring your fax line, and check the tone.
If single number fax/phone, check that the fax is set to asnwer all calls then pass on non faxes

I`m trying to scan a multi paged document into my dell inspiron 1521 laptop , however when I scan the doc it will only scan into images not into microsoft word where I want to make changes before e-mailing the doc.-----I lost the original in microsoft when the old comp.crashed. Any suggestions would be appreciated.

im sorry to say the machine you have does not have DRD distinctive ring detect.