Question about Braun 8585 Electric Shaver
The problem you've stated about your Braun model 8585 is related to old batteries. If the charging light still illuminates when you plug it in, you can simply replace the batteries which can be found at the link below
If it completely dead (no light), you will need to replace the circuit board instead. See here:
Video instructions are here:
If you are not equipped to do this repair, contact shaveroutlet.com for repair services
Posted on Aug 10, 2017
Batteries can be replaced in most Braun shavers, while leaving the
current circuit board intact. Braun didn't intend for this to be done,
and as such does not sell the batteries alone (they include them on the
circuit board). There are some aftermarket Braun shaver parts sellers
that can supply just the batteries, but they charge a rather high
price. Go to a website like "onlybatteries.com" and you can get AA
NiMh flat top batteries that will fit your Braun for less than half the
As for disassembly, it varies depending upon your shaver. Visit "http://web.archive.org/web/20041025223715/188.8.131.52/braun/Srv_Man/SHAVER/" for the older service manuals. More modern day ones can be found by Google searching.
Of course, if you're not comfortable doing soldering, then you'll have to replace the batteries along with the circuit board. Suppliers like "shaveroutlet.com" provide these parts, as VtToolMan mentioned.
Posted on Oct 22, 2009
Your batteries are starting to degrade, but the good news is they're still holding a charge for a week, so you really don't need to rush to replace them at this point.
The flickering of the charged indicator is normal, as the shaver is still plugged in and the batteries are fully charged. The flickering is due to the batteries chemicals breaking down, and as such, the charge cycle keeps "topping" them off while it's still plugged in.
When you finally aren't able to get a decent amount of cordless operation and run times from your shaver, then you'll want to get them replaced, whether you decide to do that yourself or have it done by a professional service center, is up to you.
Here's a reference for your future use. www.electricshaver.com carries replacement (factory OEM) batteries for most brands of shavers and they also will provide the repair/replacement service for you, should you decide you don't want to do it yourself. You can also give them a call at 1-888-476-1785 and request a price quote, etc.
Anyway, your shaver is working fine and all you need to do is make sure you're not letting the shaver stay plugged in and charging constantly for more than a day, since any "extra" chargind isn't doing anything except keeping the batteries at a constant state of charge. Heat is a byproduct of charging and discharging any battery and as such, you want to allow for a cool down period before recharging them.
I tend to use my shaver until it is almost completely discharged before recharging it. By doing this, you can get the longest working life out of your batteries before you'll have to replace them.
Hope you find this Very Helpful and best regards!
Posted on Oct 23, 2009
Testimonial: "very helpful"
If working properly, model 5510 will work either from the internal rechargeable batteries or directly from the cord. If your shaver no longer recharges, it needs to have the rechargeable batteries replaced.
Posted on Feb 04, 2010
If I understand correctly, the shaver is dead but all other components are in good condition. If this is the case, you should consider ordering a replacement lower unit. See shaveroutlet.com link below
Newer models made by Braun do not use all the same parts as your shaver so this would be a good way to go
Posted on Aug 23, 2010
SOURCE: I live in Orlando, Florida:
There is no longer a repair center in the Orlando area. You can get most Braun shavers repaired by Shaver Outlet Inc in Titusville. The phone number is 321-269-7724
Posted on Nov 04, 2010
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: