Trying to get the administrator password on my bizhub 350
Hi and thank you for your help : I need to get access in to the TX fax settings but in order to do this I need to get the password in the administrator mode . Do you have this code ? thank you so much.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi TECH REP MODE IS NOT 12345678 0R 00000000 THESE ARE TO GET INTO ADMINISTRATOR PASSWORDS TO GET INTO ADMIN TO GET INTO TECH REP MODE YOU HAVE TO PRESS UTILITY KEY METER ON DISPLAY DETAILS THEN STOP 00 STOP 01 IN THIS ORDER ONE AFTER THE OTHER THIS WILL TAKE YOU INTO TECH REP MODE... HOWEVER THIS MODE IS FOR TRAINED CERTIFIED TECHNICIANS ONLY AND IS NOT FOR USE BY HAVE A GO DIY PEOPLE ENTERING INTO THE TECH REP MODE MAY CAUSE DAMAGE BEYOND REPAIR TO NO CERTIFIED TECHNICANS YOU HAVE BEEN WARNED GET TRAINED FIRST
to disable tx confirmation report on a c250
1 press the utility/counter button
2 touch administrator setting
3 enter the password 12345678 and touch ok
4 touch fax setting
5 touch report setting
6 touch tx report
7 touch off
8 touch exit and return back to the normal copy screen
log into the web administration page as administrator
choose fax/scan tab
choose turn on/off/if tx fail
I chose both single and multiple destinations
if tx fails
Tested scan to email and fax to bad addresses and page printed as confirmation of failure
No pages printed for successful Tx
Note - you can still manually request confirmation at printer menu
start fax or scan to email
To output a TX Report after every fax transmission, perform the following: 1. Press the Utility/Counter key. 2. Touch [3. Administrator Setting] on the touchscreen. 3. Enter the Administrator password (default password is 12345678). 4. Touch [OK] on the touchscreen. 5. Touch [7. Fax Setting] on the touchscreen. 6. Touch [7. Report Settings] on the touchscreen. 7. Touch [TX Report] on the touchscreen. 8. Touch [ON] on the touchscreen. 9. Touch [Exit] on the touchscreen to return to the normal copy screen.
The Bizhub C250 accepts the FK-502 Fax Expansion card like most other Konica Minolta Products so this data is relevant for many models. Below are the step to enable fax confirmation pages:
Press the fax button.
Press the Utility/Counter button.
Touch Administrator Setings.
Enter password (12345678) or (00000000) are the defaults.
Touch Report Settings.
Touch TX Report Settings.
Set TX Report to ON.
Close, OK, and/or Exit all the way out.