How do i switch from farenheit to celcius? thanks

Have you Googled it? Some examples on YouTube

6 degrees Farenheit = -14.44 degrees Celcius
Water freezes at 32 degrees Farenheit or 0 degrees Celcius
Most food contains water, so what's the question?

On the Luxpro PSD111, Farenheit or Celcius are selected using the Jumper Switch J2 on the rear of the unit's circuit board:
Open = Celcius
Closed = Farenheit

Hold the Alarm 2 button down to change from Celsius to Fahrenheit.

try to inspect your remote it has a button of adjusting farenheit to celcius or try to see your users manual.

Press and hold TIMER (V) down button located under 2, for 10 seconds.

Hi. Multiply the celcius times nine and then divide the total by 5. Joe

Please give my answer 4 thumbs up since it is on target and also free to you. Thanks. Joe

zero celcius is equal to 32 degrees farenheit. Niether is cooler they are just two different ways of measuring.

Yo can do it the long way:

°F to °C Deduct 32, then multiply by 5, then divide by 9 °C to °F Multiply by 9, then divide by 5, then add 32


Or you can do it the easy way and go to:

http://www.wbuf.noaa.gov/tempfc.htm and use the converter.

Thanks for using Fixya.

This sounds like a Jacuzzi. This is hard to describe. In the control box, on the circuit board, in the upper right corner there is a small bunch of pins in 2 rows 5 or 6 in length. one set of pins have a black jumper on them, remove the jumper and temp should go to farenheit. Turn off power to spa before doing this.