Cant switch frome landscape to portrait (ipf8000)

Landscape is Portrait sideways :>D

Normally you have to tell the program (Quickbooks) to print Landscape and then you tell the Printer in Properties to print Landscape.

I just had the same in Publisher to a Canon MFP MG1720.

From the QuickBooks File menu, select Printer Setup. Click the Form Name drop-down and choose Report. Click the Options button next to the Printer name field to open your printer properties window. Go to the Finishing tab and in the Orientation section, select Portrait or Landscape.

Save QuickBooks Desktop PDF in legal size, landscape, or ...

..

most printers do not have an automatic preference but a requirement to set it prior to printing
at the print stage go to properties , select the landscape or portrait button and apply
that makes it a default setting for all future printing

Paper jam at the drum area. Are you printing to this machine ensure the print properties equals what is a the machine Landscape paper not portrait vise versa. Ensure machine not set to metric size paper vise Inch in the USA

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Hello Donna,

To change the orientation of the printer from landscape to portrait follow these simple steps;

- open any document and go to print from the file menu
- when the printers settings window opens click 'properties'
- In the next up coming windows you can see menus like 'main, page setup, effects' profiles
maintenance etc.
- click 'page setup'
- There you can see 'page size' and 'orientation'
- change the 'orientation' from landscape to portrait
- click ok and print
Done : )


please rate if this solution was helpful for you, thanks you!

If the printer is set up to over-ride program settings then your Word settings for a landscape print will be ignored. To fix this, go to your Printer Settings (accessible from Word's Print window) and look for a paper settings option that will allow the printer to either use the print settings from Word, or set the printer to always print in landscape. If you go with the second option just remember that next time you want to print portrait pages you'll have to revert this setting from landscape to portrait.

change printer settings in windows controll panel

You want to flip the text? Do you mean you want the text to display 90 degrees from normal portrait mode into landscape?

If so, when you select a document to print a window should pop up with options to select number of copies, etc. Take note of a pull down menu with portrait, and landscape options.

Use landscape to print your job with the text in this mode.

If you want this set as the default option you can set this in your print settings in the computer.
Open your printer settings in control panel, (assuming you use windows) select the printer with right click, and choose properties. There should be an item labelled document preferences. In this you can select a between Portrait and landscape. Hope this helps.

Check for the latest printer drivers for the printer from the manufacturer...

May need VISTA ready drivers...

clean the three paper selection sensors on the feeder.better you select the paper tray according to the paper orientation instead of using auto paper slect function