Gateway router wgr-200 stop working while all lan lights and power light continously blinking

Gareth Tomlinson

• 116 Answers
• Posted on May 27, 2009

SOURCE: ZyXel Prestige 660HW T1, power light blinking

It's dead, sorry. You could TRY removing the power cord, holding in the reset button and powering it back up with the button HELD DOWN for at least 10 seconds. That will factory default it, so I hope you know how to program it all again! (please don't contact me and complain if you don't...)

SOURCE: Where can I find a firmware upgrade for my wgr-200

Try this link...Hope this helps!

http://search.support.gateway.com/iphrase/query?command=text&attr1=&attr2=&t=0&text=firmware+upgrade+for+my+Gateway+wgr-200+router&x=22&y=11

SOURCE: need default password to reset

User: admin
Password: admin

If unable to access the setup pages due to a lost password, a hard rest will likely be required.

SOURCE: Can I use a Gateway WGR-200 wireless router with

Absolutely. The WGR-200 is Wi-Fi certified and will work with virtually any wireless device, regardless of operating system.

SOURCE: Need to know the user

Please download this one....

http://support.gateway.com/s/Manuals/Desktops/8509437.pdf