- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do you have any lights lit on the 24 buttons? Somehow, in programming, you have either activated HEADSET mode, or you dialed the code to set it. From your idle phone, press PROG and dial 61 and press ENTER. If the display says Headset Mode ON, press SEL and it will change to OFF. Press ENTER to save and EXIT to quit. You can program that under a button also, it's PROG button 67 SAVE. You can read the status of all your buttons by pressing PROG and each button in turn, noting what feature is programmed under it (like S-CO 001, VTR, Headset, etc.)
No. It's a programming item and a code or softkey.
The user connects the modular headset to the handset jack on
the telephone leaving the handset in place. The ON/OFF
button on the Digital Telephone is used to initiate and end calls
while using the headset.
To activate Headset Mode:
Dial  on the dial pad,
Press preprogrammed HEADSET MODE button. LED lights
To deactivate Headset Mode:
Dial  on the dial pad,
Press the preprogrammed HEADSET MODE button. LED
While Headset mode is active, the ON/OFF button
activates the headset and disables speakerphone
and intercom call announce operation at your
To install the headset, see the Installation Manual.
Station must be programmed in database
programming for headset operation before the
flexible button can be programmed.
First make sure that your headset is compatible with the Panasonic phone, look at the phone left view, there is a plug hole for headset locate at bottom part. After plug in then return to phone to enable the headset mode. To do this: 1) Press PROG. 2) Press program no. 61 (headset mode) and then press ENTER or STORE. 3) Press selection no. 0=OFF, 1=ON headset mode and then press ENTER or STORE again. 4) Press EXIT or PROG.
First make sure that your headset is really compatible with the Panasonic
phone. After plug in the headset to phone then u need to enable the
headset mode. To do this: 1) Press PROG. 2) Press program no. 61 (headset mode) and then press ENTER or STORE. 3) Press selection no. 0=OFF, 1=ON headset mode and then press ENTER or STORE again. 4) Press EXIT or PROG.
Some phones have jack on the side of the phone. If it does not, you will need a standard telephone headset with amplifier. You will need a handset button (634) programmed on the phone. Then in programing Flash 50 button 4 you will need to disable speakerphone. Flash 50 button 18 determines the headset type: 0-is amplified unit plugged into handset cord, 1-is 2.5mm jack on side of phone,
To use handset, press handset button so it is lit, use on off to answer calls with the handset.