My washing machine (6th Sense) has the door light flashing every now and again all throughout the program ... the timer counts down to 1 minute but it doesn't start spinning. When it's down to one minute it stays like that until you stop it (it just keeps washing, door light on/off then it repeats the same thing all over).
It spins fine if you turn the knob to the spinning program. Not sure what's wrong or if to buy a new machine?
The machine doesn't have a door switch, just a handle to press as you open it...and it doesn't seem to be a problem (tried pressing against the door, the light still goes on and off)The machine doesn't have a door switch, just a handle to press as you open it...and it doesn't seem to be a problem (tried pressing against the door, the light still goes on and off)
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi
check if the door is closed because it is very sensitive closing mechanism for reasons of security so sometimes you see that the door is closed but in reality it is not closed well
when the unit sense a strong vibration it automatically stop the unit. unplug the unit and wait for thirty seconds then open the lid and redistribute the cloths inside to balance the load then close lid then plug unit then push power and program your washing again
I have the same problem. Look at the previous post, it seems to be the motor brush worn out. I've opened up the machine and checked. The carbon brush remains very little. I am trying to find out a replacement brush
f13 is a problem with the door lock, I have the same machine and it takes 4 minutes for the door latch to open and if it dont in the 4 minutes F13 comes up and the machine will go off and not start again.
i have a whirpool 6th sense washing machine and it wont spin and the timer stays on 14 minutes remaining have you come across this problem and do you have a cure
Hi, Problems like these are sometimes caused by blockages in pipes due to fabric softener sludge build up. Have somebody open the machine and check the pipes leading to the pressure switch and the pressure switch itself for blockages.
Let me know if I can be of any further assistance. Best wishes, Graemevm.
×