- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Pull out the battery again and before you put it back on press and hold the select button. While holding the select button, go ahead and turn it on. Still hold the select button say 45 seconds after switching on.
You have a semi brick psp, if your psp is scph-100x fat or scph-200x slim (not ta088v3), you can fix its under recovery menu. hold right button while turn on psp then, goto advance and select format flash1 and reset setting.. or by unbrick your psp using pandora battery.
otherwise, you might to send it back to sony if your psp ta088v3 or psp scph-300x
Take out the battery of your PSP, wait 30 seconds and then reinsert it. Then start the PSP up without the charger in it. If the problem still occurs, try holding the brightness button (rectangle icon near select button) for 10 seconds. I hope this works for you.
All things are fixable. Try going into recovery mode. This is done by Pressing and holding the R button when powering up the PSP. You then can press the brightness control button to see the firmware. This might help you reboot the PSP. If it is worst than this, you may consoder sending it back to Sony for repair, although they usually do not want to fix a Squooshed PSP. I would not tell them you Sat on it. You can call SONY support at 1-800-345-7669.
If you cannot get them to Repair it, you can check out my website, www.Playstationclinic.com . I can fix it for a very reasonable price.
"tap" not hit.. the back of the psp, (where the game goes in on the back) and see if that works.. that will usually get the laser to read the disk.. perhaps the umd is dirty.. only tap on it "lightly" when you hear it loading.. i know that sounds stupid, but it worked for me countless of times.