I have a Kenmore ultra wash dishwasher model 665.15772: the lock light keeps flashing, no matter how many times I re-set the dishwasher will not go

Archie Ferrarini

• 869 Answers
• Posted on May 21, 2008

SOURCE: Kenmore dishwasher skips the wash

Replace the electronic control board.Its located under the panel you select cycles from.

SOURCE: Kenmore Ultra Wash Dishwasher: Lock On Button Issue

Have to hold the Air Dry button down til your finger hurts. Release button and the light will go off. The "4 second press" in the manual is incorrect!

SOURCE: Kenmore ultra wash dishwasher control lock light flashing

Hi jabberr216,

I'm Harvey the Master Plumber.

Your question is: You have an older model Kenmore ultra wash dishwasher model #15805890. The control lock light is flashing. No buttons are working. The dishwasher does not turn on. Any solutions?

Sure! Someone must have activated the lock. It is next to either the 'air dry' or 'heated dry' button.
Press and hold that button till the lock light goes out. About 6 seconds. That's it. It turns on the same way.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

SOURCE: Kenmore ultra wash dishwasher

These dishwashers have a control panel lock feature that allows you to lock the control panel to prevent kids from activating the unit.
To toggle lock/unlock mode, open the door, press and hold the AIR DRY button for 4 seconds.
Please do this before spending any money on the touch panel.
best
mqqn

SOURCE: My Kenmore Ultra Wash Quiet Guard

take kick plate off get book out how to reset board