MP 760 Display " the

change the exit sensor or contact one of technicians on

• Auckland
  Level 2, 60 Stanley Street, Parnell
  P.O. Box 68-024, Newton
  Auckland 1010
  
  Phone 09 - 374 0701
  Fax 09 - 368 6001
  Email [email protected]
• Wellington
  123 Taranaki Street
  P.O. Box 10-258
  Wellington 6011
  
  Phone 04 - 381 7600
  Fax 04 - 381 7615
  Email [email protected]
• Hamilton
  Cnr Anglesea & London Streets
  P.O. Box 758, Waikato Mail Centre
  Hamilton 3204
  
  Phone 07 - 957 4500
  Fax 07 - 957 4519
  Email [email protected]
• [email protected]
  • [email protected]
  • [email protected]
  • [email protected]

Nature Baby in Auckland, Wobble in Hamilton a google will find them. I repair Bugaboos and I'm based in South Auckland Just add @xnet.co.nz to my fixya name. New chassis is around $800 I can fix them for around $50

u Can Follow this step :
http://support-sg.canon-asia.com/contents/SG/EN/8200986100.html

if that reference can't solved, in other reference i found this statment

http://www.canon.co.uk/Support/Consumer_Products/products/Fax__Multifunctionals/InkJet/PIXMA_MP_series/MP620.aspx?faqtcmuri=tcm:14-610963&page=5&type=faq#Print%20head%20is%20not%20installed.%20Install%20the%20print%20head.%20U051/The%20type%20of%20print%20head%20is%20incorrect.%20Install%20the%20correct%20print%20head.%20U052
" Print head is not installed. Install the print head. U051/The type of print head is incorrect. Install the correct print head. U052 Follow the directions given in your setup sheet to install the Print Head.
If the Print Head is already installed, remove the Print Head once and then reinstall it."

Solutions List:

• Reseating the MP760 print head
• The Print Head may need replacing - MP760

Hi. Have you checked the free-wheel lever is in the correct position?
Is one of the battery lights or any LED flashing? If so, count the flashes between the pauses, and let us know.
E mail at [email protected]
Good luck. Neil.

Hi. We can supply, but try your local Invacare dealer. If you have luck, send us an email,
[email protected]

http://support-nz.canon.co.nz/contents/NZ/EN/8000663401.html

Hi
I think you need to check if the inkjet (print head/ Cartouch) is installed ok on the printer.
& Make sure it is the type supported by your printer.
I hope this was your problem.

www.officestoredepo.com for all print heads.

try toolpartsdirect.com & go to makita & type in model #