Using hp psc 1315 to print double sided on a mac? Anyone know how? this is so frustrating.https://www.fixya.com/askflow/asknow.aspx?frompr=0&ref=thaskNewHP

I've managed to get the scanning to work on Mavericks! Basically my all-in-one printer is the psc 1315 and the procedure requires installing SANE and HPLIP
http://wiki.nosdigitais.teia.org.br/Mac#Using_old_scanners_and_printers_through_SANE

It is not a very simple procedure, but is the only free solution that I know and works well.

Hi
No problem I have just put one on my website for you

You can download a driver from my website then you can use the driver to set your printer up.
Just click on this link and it will download for you, and it is best to save it on your desktop so you can find it.

Click Link = XP http://www.4all2sell.com/driver/HP-PSC-1315-XP32Bit.exe

Click Link = Vista http://www.4all2sell.com/driver/HP-PSC-1315-Vista32Bit.exe
Ones you have downloaded just double click on it to run it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks All files on my website are only there for a limited

I am unsure of the OS that you are using however I am providing the general steps with respect to Vista, If you use WIn XP then change accordingly.

Go to the printers folder, right click on the 1315, Run as administrator, Properties, (continue), Device Settings make sure "Duplex Unit (for 2 sided printing)" is set to "Installed" under installable options, OK. When printing go to the Finishing tab and select "Print on both sides".

Try printing.

first remove the printers folder,then the drivers manually one by one from the receipts folder,then remove the hp software. Deselect the hp in the printer preferences and then install the hp software again. And then it should work. Check in the printer preferences for your printer, If the hp fax is in there. Remove it and select the printer and thats it.

1.printers folder is located on the hard drive-library-printers
2.reiceipts folder is located same-library-reiceipts
3.Download the software from hp website.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Try downloading drivers from link below:

» HP PSC 1315 All-in-One Printer
» HP PSC 1315v All-in-One Printer
» HP PSC 1315xi All-in-One Printer

Hi Siddarth

In HP PSC 1315 printer after replacing new Ink Cartridges the printer always prints Alignment test page every time you turn it ON.To resolve this problem you must complete the alignment process.

Steps

1.Turn the printer ON.
2.Once its ON, it will print the Alignment page. Place the page in the scanner bed correctly.
3.Then Press START SCAN button.
4.The power light will start blinking, wait until the power lights turns solid.
5.Now Alignment process is over.Discard the paper from scanner.
6.Turn the printer OFF and then ON, it will not print that page again.

Note:Please follow this steps every time when you replace the Cartridges.

Thanks
Rizwan
[email protected]

To scan documents on Mac OS X using your HP PSC 1315, you need to download HP's "Device Manager" software which is available here : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-41992-1&lc=en&dlc=en&cc=us&product=374572&os=219&lang=en

I just installed the software and am now scanning problem-free.

allo i have the same model HP psc 1315 all in one and i can t find the drivers for my mac os . Can u help me, thank u Cat

Click Start - All programs - HP - HP Director/Solution center

Click Settings - Print settings - Printer settings

Click on the Colors. In Color Management select "Managed by Application". Click Apply and OK. Close HP Director/Solution center.
Try printing.

did you run the clean print cartridges utility?
Here is how:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00109781&cc=us&lc=en&dlc=en&product=374568&dlc=en&lang=en

Please let me know if this works for you.