I need help tv plasma phillips

bad power transformer return unit

I have come across 6 blinks; 7 blink and even 10 blinks.
the video below may throw some light. Not sure if the blink codes are universal across models. Panasonic plasma tv 7 red blinks of *****

Sound no picture on 50 inch samsung plasma ps51d450a2m - HDTV ...

www.tomsguide.com/.../58009-4-sound-picture-inch-samsung-plasma-ps...

Jul 1, 2015 - 4 posts - ‎3 authors
There is sound and no picture on plasma tv, remote works at times but ... My pioneer elilte has this mode, and it is pretty easy to completely turn ... When I connect my Laptop to my TV thru HDMI cable I ...
5 posts
Feb 22, 2015
Problems with blu ray player and plasma tv - HDTV ...
7 posts
Nov 16, 2014
I do not have audio out on my tv how do i connect so ...
8 posts
Dec 18, 2013
All channels on my tv have sound except channel 3 ...
4 posts
Jun 29, 2010
More results from www.tomsguide.com

No picture or sound in my Panasonic TH-P42UT30A plasma ...

Hi!
My name is Chris.
I have this Phillips Wide Screen TV that didn't have or come with a remote, so I had to go out and buy a universal remote for it today from a BIG W Store. I'm having some technical difficulties & problems with switching and turning it on, but as I use the universal remote to turn on the TV, I'm having a bit of a slight problem with it turning it on, Ok, Yes, it works and Powers on, but there is nothing showing or giving me the indication that there is no picture or sound showing up on this Wide Screen Phillips TV, But there is a little red & green light at the bottome right hand corner that keeps on flashing red when ever I use the universal remote to switch the power on. Is there a possibility, that i can get some help on here, to help me out with any suggestions, is to why I'm not getting any picture or sound showing up on this TV with this universal remote ? Is there anyway that i can maybe get some help with this to help me out with solving my issue with the Phillips Wide Screen TV ?

Plasma? Your power supply has bad capacitors. 3300uf most likely. This is a common problem on some Philips plasma TVs. Power board is located top center of the TV with the rear access panel removed. look toward the lower left portion of the board. If you notice any capacitors (they look like little plastic wrapped cans) with swollen tops or leaking dark fluid from the top of them, replace them. Myself, I always step up the voltage rating... ex: 3300uf, 10v -> 3300uf, 16v.

I'm having the same issues with my phillips flat panel. I downloaded the firmware update from phillips and that helped...but only once. I'm back to the same issue this morning. But you might try this download...it may work for you.

pls. check the power inverter.

Hello gruponapa,

This problem is linked to a power supply issue. The SSB is part of the power supply chain and will cause system failure if the board is defective. I have seen to many of these type of modular power supply boards fail. The shutdown circuit is detecting excessive voltage, and in the process of turning off the set it may have blown something else. I am begining to suspect a design flaw, which happens from time to time. I would suggest having a qualified TV repair person take a look at the TV and work on it.

I hope this helps,

Thank you,

Shuttle83

dont waiste your money problem main or logic board or if shure power supply go radio shack and get one with specifications match voltage,ampers,and polarity

I have one here next to me when I pushed power the green LED started blinking until it brought up the picture 1 blink per second about 8 blinks. i am on the tuner input it may vary on different inputs also if it blinking like 1 blink pause 4 blinks or some pattern like that that is tech diagnostic error codes. if the tv is working you should be able to get a menu or on screen display even without an input attached. Also I only heard 1 relay click in the back