I plug in machine and hear a beep. Nothing works.

Question edited, toss in a load of CAPS.

The capacitor is likely to have failed internally. It can still produce voltage. Or the transformer that supplies power has failed.

No one else has recorded this issue

https://www.google.com/search?q=LG+Dehumidifier+model+LHD459ELY9.+No+power+to+the+display

..

Hi, my friend gave me a delonghi 5 cup k mix coffee maker. the water starts to heat you a hear a gurgle a little water is filtered to the pot and then nothing it just stops working. any ideas on how to trouble shoot?

Hi,

Here is a tip that explains what can be happening to make the dehumidifier showthat the bucket is full when it is not.

Dehumidifier Problem It shows Bucket Full

heatman101

If you just purchased and it won't turn ON, don't waste time trying to fix the unit. Return it to the place of purchase for a replacement unit or a refund.

Thanks for choosing FixYa.

Hi,

Here is a tip that explains what can be happening to make the dehumidifier showthat the bucket is full when it is not.

Dehumidifier Problem It shows Bucket Full

heatman101

[]
[\][

Remove the water collection bucket and reinstall it. Make sure the bucket fits "squarely" in the holder from top to bottom. The bottom should not tilt down at the bottom, when it's properly installed.
While you have the bucket out, look in the top of the bucket for a float valve. If it has one, it may be stuck in the UP position. Juggle the float arm to get it to return to the DOWN Position and reinstall the bucket as described above.

Either of the tings mentioned above, will cause the unit to not turn ON.

Hope this helped you and thanks for choosing FixYa.

Hi,

There are many reasons why a dehumidifier will not work or collect water.

Here is a tip that I wrote to help people to figure out what is going wrong with their dehumidifier

Dehumidifier is running but no water is in bucket

heatman101


...............

The water tray is probably not installed correctly. Take it out and reinsert it. It has to close a switch when it is in place.Mine at home is really touchy it has to be put in just right to work.

I suggest checking the fuse on the circuit board.

the beep sound means that there are ac voltage in the unit but you gona need a tech there is no removal parts in that board and sound as a bad ic is there..good luck