My phone fell down from a table and not working since then. Please tell me how to repair it.

Does it have a removable battery? If so remove the battery and see what happens. You may have to do a hard reset, which will involve holding down certain buttons as you power on the phone, which will then bring you to a screen that will list options for you to be able to reset. You will have to search for the proper buttons at the man. website.

Cameras do not fair very well from even slight impacts, it will need to be looked at by repair shop.

on hossy na

I thought your printer have a technical issue. After resetting the toner and restarting the printer, still printer light blinked continuously. That means the printer has some other technical issue.

Find here the reasons and solutions to fix the HP Printer lights blinking error.

I just guess something got damaged when it fell down, there is no way to tell what's really wrong with it without seeing it myself. and I don't think you can get a replacement, because it's your fault for letting it fall down in the first place. but I would try it, what's the harm ;)

Since your computer fell off a table this is definately a hardware problem, something might have shifted inside and in this case I would not recommend that you open it to see what shifted.
I would recommend that you take it to a repair store for them to pull it and fix it for you. Sorry to hear.

It happened 2 months ago on my phone after it fell 3 meters high. Surprisingly after intentionally banging the phone face first on my table (keep it gentle) it worked and has been OK ever since. I hope this works for you too. =)

it might be a hardware failure. do you still have garanty on your phone?
if yes, return it.
and if no, well, u might wanna take your phone apart to see if there are any broken parts in it. but you need some experience with this (dont recommend it).

Hi syfur,
Switch on your camera and "Give a slap on the table with your camera", i am sure it will work.

Most likely something got corroded inside of the motherboard, shorting out a component or two. Your only solution will be to open it up and clean it with a soft toothbrush or something similar. If that doesn't work, I guess you'd have to replace specific components on the board and that's no easy task...