I have a Philips rear-projection HDTV monitor. The model # 51PW9303/17F. The problem is that I can no longer get the TV to display the "AV5" selection. This is where my DirecTV box is connected to the TV. I can still get AVs 1,2,3,4, and CVI. Is there a way to reset the TV, or restore the factory settings so that I can again access the AV5 selectiion? I have a "Quick Use and Setup Guide," but not a complete manual.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
do you get a click if not check the fuse inside next to the ac cord inside the unit
if you do have a click then your convergance amps let go you will need a tech to replace them qbout 150 dollar job
look on the back or sides of the unit. it should have a hdmi cable hookup, it will look like a monitor input, then you have to make sure you set the tv input to that. then you have to set your laptop to add another monitor to be able to use it.
I reset the comcast cablebox. I totally unplugged the cablebox for 20 seconds and then plugged it back in. Turned on both the cablebox and the tv and the HDTV channels operated correctly.
×